Westone BLUETOOTH CABLE V2 Users Manual

Cable V2

User Guide

PRODUCT TIPS

THANK YOU

for purchasing the Westone®

Bluetooth® Cable V2

Please register your product to receive information on new

product releases, promotions, and all of the latest updates

» Register at:

The warranty covers defects in materials and workmanship

for ONE YEAR after the original date of purchase. Product

must be purchased from a Westone authorized dealer,

proof of purchase is required to verify eligibility.

from Westone Audio.

www.westone.com/productregistration

Get the most from your new Bluetooth
Cable V2 by following these helpful tips:

• Avoid exposing the Bluetooth cable to extreme
temperatures and prolonged exposure
to direct sunlight.

• Do not immerse the cable and cable modules into
water or liquids of any kind. The cable and cable
modules are water resistant not water proof.

• Please avoid any shock damage or strong impacts
to the cable or cable modules, as this can aect the
performance of the cable.

• When installing or removing earphones/earpieces
from the Bluetooth cable, always grasp the cable
connectors and not the cable. Failure to do so could
aect the performance of the cable.

PRODUCT OVERVIEW

BLUETOOTH CABLE V2

PORTABLE CHARGING DOCK

MMCX Audio

L = Left R = Right

Battery Module

Charging Ports

Cable Management Slider

™

Connector

Control Module

+ Volume Up

Power

- Volume Down

Microphone

Cover Closed

R

Mini USB

Port

Cover

Cover
Release

Charging

Prongs

Cover Open

CHARGING CABLE

USB Mini USB

CONNECTING EARPHONES

DISCONNECTING EARPHONES

How to attach earphones to the cable:

1. Identify the right and left MMCX connectors,
each connector is marked “R” for right and “L” for left.

2. Identify the right and left earphones/earpieces. Match
the appropriate earphone to the correct cable,
right + right or left + left.

3. Grasp the MMCX connector and insert it into the
earphone/earpiece by pushing it into the female

connector until it clicks into place.

MMCX

4. Repeat for the other side.

How to disconnect earphones from the cable:

1. Hold the earphone/earpiece rmly with one hand,

and the MMCX connector with the other hand.

2. Pull the MMCX connector straight out of the
earphone/earpiece. Do Not pull at an angle, or the
connector will become harder to remove from the
female socket.

CAUTION:

earphone/earpiece by pulling directly on the cable.
This could damage or destroy the cable.

Never try to remove the cable from the

PAIRING THE CABLE TO A DEVICE

How to pair the cable to the device:

1. Hold down the power button for ve seconds. The
indicator light located next to the power button
will begin ashing red and blue to indicate the
pairing process has begun. The voice prompt will
indicate “Pairing”.

2. To complete pairing the cable with the device

follow these steps:

• iPhone: Go to Settings/General/
Bluetooth/On*

• Android: Go to Settings/Bluetooth/On/
Scan for devices*

• Windows: Go to Settings/Bluetooth/On*

*Pairing procedure can vary per device.

3. Select “Westone BT V2”

4. If the device asks for a passcode, enter four zeros
(0000) for the passcode or accept the connection.

5. Once the device is successfully paired the indicator
light will ash blue three times every two seconds.
The voice prompt will indicate “Connected”.

Indicator Light

Power Button