Westone Bluetooth Cable Users Manual
Designed in Colorado, USA
Bluetooth® Cable
User Manual
Registration + Maintenance Tips
Congratulations on purchasing your new Bluetooth
cable! Make sure to register your new cable and be the
rst to know about new products, promotions, contests
and accessories.
» Register at: www.westone.com/productregistration
Your warranty covers defects in materials and workmanship for a period of ONE
YEAR from the date of original retail purchase from a Westone authorized dealer.
Proof of purchase is required to verify eligibility.
Here are a few simple guidelines that can greatly increase your
listening enjoyment and the lifespan of your Bluetooth Cable:
• Avoid exposing your cable and monitors to liquids and
temperature extremes.
• Avoid strong impacts to the cable modules.
• To disconnect your cable grasp the plug at the end of the
cable and pull straight out. Never pull on the cable itself as
this could break the unit. Also, avoid bending the cable at
the connection to the monitors.
Cable Overview
MMCX Audio
Connector
L and R designate Left and
Right earpiece
Battery
Charge Port
Cable
Management
™
Vol +
Power
Vol -
zoomed in
Connecting your Cable
R
To connect your Bluetooth cable:
1. Identify which cable is the left and the right by the “L” and
the “R” at the tip of the cable.
2. Match the cable to the appropriate earphone.
3. Insert the cable into the earphone by pushing directly into
the socket.
To disconnect your cable from your monitor:
1. Hold the monitor and the tip of the cable rmly with each
hand pulling at a straight angle from the socket.
2. DO NOT PULL FROM THE WIRE OR AT AN ANGLE.
R
R
Pairing your Device
1. Hold down the power button for 5 seconds. The indicator
light located next to the power button will begin ashing
red and blue to indicate the pairing process has begun.
2. To activate Bluetooth® on your phone and set it to search
for new devices, follow the steps below for your phone:
• iPhone: Go to Settings > General > Bluetooth > On*
• Android: Go to Settings > Bluetooth> On > Scan for
devices*
• Windows: Got to Settings>Bluetooth>On*
*Pairing steps can vary by device.
3. Select “Westone BT”
4. If your phone asks for a passcode, enter four zeros (0000)
for the passcode or accept the connection.
5. Once successfully paired, you will hear a single beep and
the indicator light switches from ashing red and blue to
just ashing blue.
Loading...