Westinghouse WRJ600UW User Guide
Universal Cooker Hood Installation and Operation Manual
The instructions in this manual are for cooker hood models:
These cooker hoods are domestic appliances which have been manufactured and tested to comply with Australian and New Zealand
Safety Warnings
•
•
•
•
•
•
•
•
•
•
•
Cleaning
Electrical Connection
•
•
•
WRJ600U, WRJ603U, WRJ611U, WRJ900U, WRJ903U, WRJ911U,RHN6, RHN9, RFD602, RFD609.
Standard AS/NZS 3350.2.31.
Young children should be supervised to ensure they do not play with the cooker hood.
The cooker hood is not intended for use by young children or infirm persons without supervision.
Ensure the cooker hood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
Grease filters must be removed every four weeks (maximum) for cleaning to reduce the risk of fire.
Do not
flamb e
This cooker hood is not recommended for
The exhaust air from the cooker hood must not be discharged into any heating flue, which may carry combustion products
from other sources.
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when the cooker hood is used at the same time as appliances burning gas or
other fuels.
Always cover lit gas burners with pots or pans when the cooker hood is in use.
Always switch off gas burners before you remove pots or pans.
Wipe the cooker hood body and flue with a sponge or soft cloth soaked in warm soapy water.
other abrasive materials.
Check that the mains voltage matches with the voltage on the data plate inside the cooker hood.
Check that the installation complies with standards of local gas and electricity authorities.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
under the cooker hood.
barbeques.
Accessories
•
Use
Do not
use oven cleaners or
125mm round exhaust
ducting for best
performance.
•
•
•
•
When using flexible duct always install duct with the wire helix pulled taut to minimise pressure loss.
Try to keep exhaust duct short and straight.
Keep bends in the exhaust duct to a minimum.
Do not reduce the size or restrict exhaust duct.
Alternative flue connection
1 metre flexible duct with joiners AR125FD
Flue collar 1 supplied with hood
Loading...