USER MANUAL
INDUCTION COOKTOPS
WHI633BC, WHI643BC, WHI645BC
WHI743BC, WHI943BC, WHI945BC
TIPS & INFORMATION
ENVIRONMENTAL TIPS
WARNING
WARNING
WARNING
TIPS & INFORMATION
ENVIRONMENTAL TIPS
CONTENTSCONGRATULATIONS
WARNING
IMPORTANT SAFETY INSTRUCTIONS
Dear customer,
Congratulations on the purchase of your new cooktop.
Before you use the cooktop, we recommend that you
read through the whole user manual which provides the
description of the cooktop and its functions.
To avoid the risks that are always present when you use
an electrical appliance, it is important that the cooktop
is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
A
fter unpacking the appliance, please check it is not
damaged. If in doubt, do not use the appliance but
contact your local Customer Care Centre.
or contact details, refer to the last page of this user
F
manual. This appliance complies with requirements of
Australian Standard AS/NZS 60335.2.6
Conditions of use
This appliance is intended to be used in household
and similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments
Please ensure you read the instruction manual fully
before you call for service, or a full service fee could
be applicable.
R
ecord model and serial number here:
Important safety instructions ........................................................3
Installation instructions ....................................................................5
Specifications ........................................................................................7
Product description .......................................................................... 8
Operating instructions .................................................................... 12
Helpful hints and tips ......................................................................16
Care and cleaning .............................................................................18
Troubleshooting... .............................................................................. 19
Notes ....................................................................................................... 21
Warranty ............................................................................................... 23
Please read the user manual carefully and store in a handy
place for later reference.
The symbols you will see in this booklet have
these meanings:
WARNING
This symbol indicates information concerning your
personal safety.
CAUTION
This symbol indicates information on how to avoid
damaging the appliance.
IMPORTANT
This symbol indicates tips and information about use
of the appliance.
ENVIRONMENT
This symbol indicates tips and information about
economical and ecological use of the appliance.
IMPORTANT
Check for any damage or marks
If you find the cooktop is damaged or marked, you must
report it within 7 days if you wish to claim for damage/
marks under the manufacturer’s warranty. This does not
affect your statutory rights.
ENVIRONMENT
Information on disposal for users
• All of the packaging materials are recyclable.
Please dispose of those materials through your local
ecycling depot or by placing them in appropriate
r
collection containers.
• If you wish to discard this product, please contact
your local authorities and ask for the correct method of
disposal.
WARNING
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance
when it operates or when it cools down. Accessible
parts are hot.
• If the appliance has a child safety device, we
recommend that you activate it.
Installation
WARNING
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with
the appliance.
• Keep the minimum distance from the other
appliances and units.
• Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
• Seal the cut surfaces with a sealant to prevent
moisture to cause swelling.
• Protect the bottom of the appliance from steam
and moisture.
• Do not install the appliance adjacent to a door or
under a window. This prevents hot cookware to fall
from the appliance when the door or the window
is opened.
• If the appliance is installed above drawers make sure
that the space, between the bottom of the appliance
and the upper drawer, is sufficient for air circulation.
• Make sure that the ventilation space of 5 mm,
between the worktop and the front of the below unit,
is free. The warranty does not cover damages caused
by the lack of an adequate ventilation space.
• The bottom of the appliance can get hot. We
recommend to install a non-combustible separation
panel under the appliance to prevent access to
the bottom.
Model number:........................................................................................
Serial number:
PNC: .............................................................................................................
2 3IMPORTANT SAFETY INSTUCTIONSCONTENTS
.........................................................................................
IMPORTANT INFORMATION THAT
MAY IMPACT YOUR MANUFACTURER’S
WARRANTY
Adherence to the directions for use in this manual
is extremely important for health and safety.
Failure to strictly adhere to the requirements in
this manual may result in personal injury, property
damage and aect your ability to make a claim
under the Westinghouse manufacturer’s warranty
provided with your product. Products must be
used, installed and operated in accordance with
this manual. You may not be able to claim on the
Westinghouse manufacturer’s warranty in the
event that your product fault is due to failure to
adhere this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
TIPS & INFORMATION
INSTALLATION INSTRUCTIONS
Electrical connection
WARNING
Risk of fire and electrical shock.
• All electrical connections must be made by a
qualified electrician. Before wiring make sure the
mains terminal is not live.
• Make sure the appliance is installed correctly. Loose
and incorrect plug and socket connections can make
the terminal become too hot.
• The appliance must be installed correctly to ensure
anti-shock protection.
• Cables from other electrical appliances must not
touch the hot surface of the appliance.
• Other than the connection point in the terminal
block, do not let the electrical supply cord touch the
appliance or hot cookware. Ensure electrical supply
cord is not tangled.
• Use a strain relief clamp on cable.
• Use the correct mains cable.
• Make sure there is no damage to the mains plug and
to the mains cable. Contact the Service Centre or an
electrician to change a damaged mains cable.
• The electrical installation must have an isolation
device which lets you disconnect the appliance from
the mains at all poles. The isolation device must have
a contact opening width of minimum 3mm.
• Use only correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.
Use
WARNING
Risk of injury, burns or electric shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Do not use an external timer or a separate remotecontrol system to operate the appliance.
• Do not let the appliance stay unattended during
operation.
• Do not operate the appliance with wet hands or when
it has contact with water.
• Do not put cutlery or saucepan lids on the cooking
zones. They can become hot.
• Set the cooking zone to “off” after each use. Do not
rely on the pan detector.
• Do not use the appliance as a work surface or as a
storage surface.
• If there is a crack on the surface, disconnect power
supply to prevent the electrical shock.
• Users with a pacemaker must keep a distance of
minimum 30 cm from the induction cooking zones
when the appliance is in operation.
WARNING
Risk of fire or explosion.
• Fats and oil when heated can release flammable
vapours. Keep flames or heated objects away from
fats and oils when you cook with them.
• The vapours that very hot oil releases can cause
spontaneous combustion.
• Used oil, that can contain food remnants, can cause
fire at a lower temperature than oil used for the first
time.
• Do not put flammable products or items that are wet
with flammable products in, near or on the appliance.
• Do not try to extinguish a fire with water. Disconnect
the appliance and cover the flame with a lid or a
fire blanket.
WARNING
Risk of damage to the appliance.
• Do not keep hot cookware on the control panel.
• Do not let cookware to boil dry.
• Be careful not to drop utensils or cookware on the
glass, the glass surface can be damaged
• Do not activate the cooking zones with empty
cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or with a
damaged bottom can cause scratches on the glass
ceramic. Always lift these objects up when you have
to move them on the cooking surface.
Care And Cleaning
WARNING
Risk of damage to the appliance.
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Do not use water spray and steam to clean
the appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Built-in appliances
• Only use the built-in appliances after you assemble
the appliance into correct built-in units and work
surfaces that align to the standards.
Connection cable
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two
phase connection.
• Replace the damaged mains cable with a special
cable (type H05BB-F Tmax 90°C or higher). 3 x
2
2.5mm
local Service Centre.
• The cable conditions must be in accordance with
regulations and the terminal screws tightened
securely.
• The connecting cable is to be secured with the mains
cable cleat and the covering closed by pressing firmly
(lock into place).
• Before switching on for the first time, any protective
foil or stickers must be removed from the glass
ceramic surface.
with an all-pole 25A breaker. Speak to your
To attach the seal
• Clean the worktop in the area of the cut out section.
• Bond the seal stripe supplied on the lower edge
of the appliance along the outer edge of the glass
ceramic. Do not extend it. Let stay the cut ends in the
middle of one side. When, you cut it to length (add
some mm), push the two ends together.
Assembly
min.
500mm
min. 50mm
NOTE: The clearance must meet or exceed the minimum
recommended for both the rangehood and cooktop.
Refer to the rangehood installation manual.
WARNING
Refer to “Safety information” chapter.
IMPORTANT
Before the installation, note down the serial number (Ser.
Nr.) from the rating plate at the front of this manual. The
rating plate of the appliance is on its lower casing.
4 5INSTALLATIONIMPORTANT SAFETY INSTRUCTIONS
TIPS & INFORMATION
INSTALLATION INSTRUCTIONS (CONTINUED) SPECIFICATIONS
WHI633BC, WHI643BC, WHI645BC, WHI743BC
R 5mm
600mm
=
560
+1
mm490+1mm
=
WHI945BC, WHI943BC
min. 20mm
Technical data
PNC
Product dimensions (w x d) mm
Cut-out dimensions (w x d) mm
Voltage (volts)
Cycles (Hz)
Total power (Watts)
Elements- Without/ With Boost
(Watts)
Front Left
Rear Left
Front Right
Rear Right
Centre
WHI633BC WHI643BC WHI645BC WHI743BC WHI943BC WHI945BC
949 163 425 949 163 426 949 163 427 949 163 428 949 163 429 949 163 431
590 x 520 590 x 520 590 x 520 700 x 520 900 x 515 910 x 520
560 x 490 560 x 490 560 x 490 560 x 490 880 x 490 880 x 490
220-240 220-240 220-240 220-240 220-240 220-240
50-60 50-60 50-60 50-60 50-60 50-60
6500 6500 7400 6500 6500 7400
3 4 4 4 4 4
1400/2500 2300/3200 2300/3200 2300/3200 2300/3200 2300/3200
1800/2800 1400/2500 2300/3200 1400/2500 1400/2500 2300/3200
3600/5200 1400/2500 1400/2500 1400/2500 1400/2500 1800/2800
N/A 1800/2800 1800/2800 1800/2800 1800/2800 N /A
N/A N/A N/A N/A N/A 2300/3600
R5mm
=
490
+1
mm
880+1mm
600mm
=
IMPORTANT
It is recommended to centre the bench cutout with
equal distance front and back as shown but the product
has also been certified to be installed with no clearance
between the rear edge of the cooktop glass and rear
wall if required. In doing so, installers still need to leave
sufficient clearance to take into account that the glass
dimensions are larger than the cut out.
min. 38mm
Installation above
an oven
6 7SPECIFICATIONSINSTALLATION
PRODUCT DESCRIPTION
WHI633BC
1 2
WHI643BC
1 2
WHI743BC
1
1
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =140 mm).
2
Induction cooking zone 3600 W, with Power function
5200 W (minimum cookware diameter =180 mm).
3
Control panel
4
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
34
WHI943BC
5
1 2
2
1
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
2
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =145 mm).
3
3
4
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
4
Control panel
5
Induction cooking zone 2300 W, with Power function
3200 W (minimum cookware diameter =180 mm).
1
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
1
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
2
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =145 mm).
2
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =145 mm).
3
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
3
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
3
4
Control panel
4
Control panel
5
Induction cooking zone 2300 W, with Power function
3200 W (minimum cookware diameter =180 mm).
4
5
Induction cooking zone 2300 W, with Power function
4
35
3200 W (minimum cookware diameter =180 mm).
5
WHI645BC
1
8 9PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
WHI945BC
1 2
2
1
Induction cooking zone 2300 W x2 , with Power
1
Induction cooking zone 2300 W, with Power function
3200 W (minimum cookware diameter =180 mm).
function 3200 W x2 (minimum cookware diameter
=125 mm).
2
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =145 mm).
2
Induction cooking zone 1800 W, with Power function
2800 W (minimum cookware diameter =145 mm).
3
Induction cooking zone 2300 W, with Power function
3600 W (minimum cookware diameter =180 mm).
3
4
3
Induction cooking zone 1400 W, with Power function
2500 W (minimum cookware diameter =125 mm).
4
Control panel
4
Control panel
5
5
4
3
Induction cooking zone 2300 W, with Power function
3200 W (minimum cookware diameter =180 mm).
PRODUCT DESCRIPTION (CONTINUED)
WARNING
Control panel layout - WHI643BC, WHI743BC & WHI943BC
6 10 7 8 7 6
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
SENSOR FIELD FUNCTION
1
It activates and deactivates the appliance
12
Control panel layout - WHI633BC
6 10 7 8 7
2
3
4
5
6
4569654321
7
8
9
10
11
12
/ P
/
A heat setting display It shows the heat setting
Cooking zones’ indicators of timer It shows for which zone you set the time
The timer display It shows the time in minutes
/
Sets all operating zones to a keep warm setting
It locks/unlocks the control panel
It activates the Power function
It increases or decreases the heat setting
It selects the cooking zone
It increases or decreases the time
Connects left hand zones (selected models)
To activate and deactivate the manual mode of the
Hob2Hood function
12
Control panel layout - WHI645BC & WHI945BC
6 644
1 2 11 6 4 4 69 123
11
4569654321
811
Heat setting displays
DISPLAY DESCRIPTION
The cooking zone is deactivated.
The Keep Warm function operates. ( Only for WHI645BC/WHI945BC)
-
+ digit
The cooking zone operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the cooking zone.
There is a malfunction.
OptiHeat Control (3 step residual heat indicator): continue ooking / keep warm / resdiual heat
The Lock/Child Safety device operates.
The Power function operates.
The Automatic Switch-Off operates.
SenseBoil function operates.(Only for WHI645BC/WHI945BC)
OptiHeat Control ( 3 step residual heat indicator)
WARNING
Risk of burns from residual heat!
To activate and deactivate the function. The indicators
above the symbol show the progress of the function
OptiHeat Control shows the level of the residual heat.
The induction cooking zones make the heat necessary
for cooking directly in the bottom of the cookware.
The glass ceramic is hot from the heat of the cookware.
10 11PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you activate
the appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
The sound operates some time and the appliance
deactivates. Remove the object or clean the
control panel.
• The appliance become too hot (e.g. when a saucepan
boils dry). Before you use the appliance again, the
cooking zone must be cool.
• You use incorrect cookware. The symbol
and the cooking zone deactivates automatically after
2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time,
appliance deactivates. See the Heat Setting display
table below.
).
comes on
comes on and the
The times of Automatic Switch Off
HEAT
SETTING
-
-
-
COOKING ZONE
DEACTIVATES AFTER
6 hours
5 hours
4 hours
1.5 hours
The heat setting
Touch adjacent to the element you want to control
to increase the heat setting. Touch adjacent to the
element you want to control to decrease the heat setting.
The display shows the heat setting. Touch
adjacent to the element you want to control at the
same time to deactivate the cooking zone (applies to
WHI643BC, WHI633BC, WHI743BC and WHI943BC).
Touch the control bar at the heat setting. Chnage to the
left or the right, if it is neccessary. Do not release before
you have a correct heat setting. The display shows the
heat setting. (applies to WHI645BC and WHI945BC)
and
Automatic heat up
You can get a
necessary heat setting
in a shorter time if you
activate the Automatic
Heat Up function.
This function sets the
highest heat setting
for some time (see
the illustration), and
then decreases to the
necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch . The symbol comes on in the display.
2. Immediately touch
want to control. The symbol
the display.
3. Immediately touch
want to control again and again until the necessary
heat setting comes on. After 3 seconds
in the display.
4. To stop the function touch
you want to control.
adjacent to the element you
comes on in
adjacent to the element you
comes on
adjacent to the element
To start the Automatic Heat Up function for a
cooking zone: (For WHI645BC and WHI945BC
Models)
1. Touch P ( comes on in the display).
2. Immediately touch the necessary heat setting.
After 3 seconds comes on in the display. To stop the
function change the heat setting.
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After, that the induction cooking
zone automatically sets back to highest heat setting. To
activate, touch (on WHI645BC and WHI945BC
modes is P) comes on. To deactivate, touch
(on WHI645BC and WHI945BC models is P) or
WHI645BC and WHI945BC models touch any necessary
heat setting ) adjacent to the element you want to
control.
(on
Power management
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for
one cooking zone in the pair. It automatically decreases
the power in the second cooking zone to a lower level.
The display for the reduced zone change between
two levels.
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time. Set the Timer after
the selection of the cooking zone.
You can set the heat setting before or after you set
the timer.
To set the cooking zone: touch again and again
•
until the indicator of a necessary cooking zone comes on.
• To activate or change the Timer: touch or of the
timer to set the time ( 00 - 99 minutes). When the
indicator of the cooking zone starts to flash slow, the
time counts down.
• To deactivate the Timer: set the cooking zone with
and touch to deactivate the Timer. The
remaining time counts back to 00. The indicator of
the cooking zone goes out.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
and 00 flashes. The cooking zone deactivates.
• To stop the sound: touch
Timer as a minute minder while the cooking zones
do not operate. Touch
the time. When the time comes to an end, the sound
operates and 00 flashes
• To stop the sound: touch
. You can use the
. Touch or to set
.
Pause (models with independent pause button)
The function sets all cooking zones that operate to
the lowest heat setting
When
The
• To activate this function touch
• To deactivate this function touch
operates, you cannot change the heat setting.
function does not stop the timer function.
comes on. For WHI645BC/WHI945BC models the
symbol come on.
that you set before comes on.
.
The symbol
. The heat setting
Flex Function (models WHI645BC & WHI945BC)
The Flex Function can be used with the griddle plate
accessory (sold separately).
function connects two cooking zones and they
The
operate as one.
First set the heat setting for one of the left hand cooking
zones. To start the Flex function touch
To set or change the heat setting touch one of the left
hand controls.
To stop the Flex function touch
will then operate independently
.
. The cooking zones
Lock (models with independent lock button)
When the cooking zones operate, you can lock the
control panel, but not
change of the heat setting.
First set the heat setting. To start this function touch
The symbol comes on for 4 seconds. The Timer
stays on.
To stop this function touch
set before comes on. When you stop the appliance, you
also stop this function.
It prevents an accidental
.
The heat setting that you
.
12 13OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
TIPS & INFORMATION
TIPS & INFORMATION
TIPS & INFORMATION
TIPS & INFORMATION
OPERATING INSTRUCTIONS (CONTINUED)
TIPS & INFORMATION
TIPS & INFORMATION
TIPS & INFORMATION
TIPS & INFORMATION
The child safety device
This function prevents an accidental operation of
the appliance.
To activate the child safety device
• Activate the appliance with . Do not set the
heat settings.
• Touch
WHI645BC & WHI945BC). The symbol
• Deactivate the appliance with
for 4 seconds ( button for models
comes on.
.
To deactivate the child safety device
• Activate the appliance with . Do not set the
heat settings. Touch
button for models WHI645BC & WHI945BC).
The symbol comes on.
• Deactivate the appliance with
for 4 seconds (
.
To override the child safety device for only one
cooking time
• Activate the appliance with . The symbol
comes on
• Touch
WHI645BC & WHI945BC). Set the heat setting in 10
seconds. You can operate the appliance.
• When you deactivate the appliance with
the child safety device operates again.
.
for 4 seconds ( button for models
,
Sense Boil® (This function only applies to
WHI645BC & WHI945BC)
The function automatically adjusts the temperature of
water so that It does not boil over once it reaches the
boiling point.
If there is any residual heat on the
cooking zones you want to use, an acoustic signal
is emitted and the function does not start.
1. Touch
2. Touch
A blinking
can presently use the function.
3. Touch the control bar of any available cooking zone
for which you want to start the function (between the
heat setting 1-9).
The function starts.
If you do not choose any cooking zone within 5 seconds
the function does not activate.
to activate the hob.
to activate the function.
appears for cooking zones on which you
Once the function starts the indicators above
the symbol come on one after another until
the water reaches the boiling point
When the function detects the boiling point the hob
emits an acoustic signal and the heat level automatically
changes to 5.
If all cooking zones are already in use or there is some
residual heat on all of them, the hob emits a beep sound,
the indicators above
start.
To deactivate the function touch
deactivates and the heat setting goes down to 0) or
touch the control bar and adjust the heat setting manual
blink and the function does not
(the function
Hints & Tips for SenseBoil®
The function works best for boiling water and preparing
potatoes.
It does not work with cast iron and non-stick
cookware, e.g. with a ceramic coating. Enamelled
steel pots are recommended for achieving the best
results while boiling potatoes.
Check if the pot you chose is suitable for SenseBoil® by
monitoring the first cooking session.
To use SenseBoil® efficiently follow the advice below:
• FiIl between half to three quarters of the pot with cold
tap water leaving 4 cm from the rim of the pot empty.
Do not use less than 1 or more than 5 litres of water.
Make sure the total weight of the water ( or the water
and potatoes) ranges between 1-5 kg.
• If you want to cook potatoes, make sure they are
completely covered with water, but remember to leave
at least one quarter of the pot empty.
• To achieve the best results cook only whole, unpeeled,
medium-sized potatoes.
• Make sure you do not pack potatoes too tightly.
• Avoid producing external vibrations (e.g. from using
a blender or placing a mobile phone next to the
appliance) when the function is running.
• If you want to use salt, add it after the water reaches the
boiling point.
• The function may not work properly for water kettles
and espresso pots.
Hob²Hood
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra-red signal communicator. Speed of the fan
is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You can
also operate the fan from the hob manually.
IMPORTANT
For most of the hoods the remote system is originally
deactivated. Activate it before you use the function. For
more information refer to hood user manual.
Operating the function automatically
The default automatic mode from the factory is H5. You can
change the automatic mode by following the instructions
below. When you activate the hob the hood will adjust the
fan speed automatically. Please note the below table is a
guide, the fan speed varies depending on the temperature
measured on the cooking zones of the cooktop which can
be affected by the heat setting(s) selected as well as the
size and volume of what you are cooking.
Automatic modes
AUTOMATIC
LIGHT
Mode H0 Off Off Off
Mode H1 On Off Off
Mode H2 On Fan speed 1 Fan speed 1
Mode H3 On Off Fan speed 1
Mode H4 On Fan speed 1 Fan speed 1
Mode H5 On Fan speed 1 Fan speed 2
Mode H6 On
1. The hob detects the boiling process and activates fan
speed in accordance with automatic mode.
2. The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3. This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
and goes off
3. Touch
4. Touch
5. Touch
for 3 seconds. The display comes on
for 3 seconds.
a few times until comes on.
of the Timer to select an automatic mode
BOILING FRYING
Fan speed
2
Fan speed 3
IMPORTANT
To operate the hood directly on the hood panel
deactivate the automatic mode of the function.
IMPORTANT
When you finish cooking and deactivate the hob,
the hood fan may still operate for a certain period of
time. After that time the system deactivates the fan
automatically and prevents you from accidental activation
of the fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do
that touch
automatic operation of the function and allows you to
change the fan speed manually. When you press
raise the fan speed by one. When you reach an intensive
level and press
deactivates the hood fan. To start the fan again with fan
speed 1 touch
when the hob is active. This deactivates
you
again you will set fan speed to 0 which
.
IMPORTANT
To activate automatic operation of the function,
deactivate the hob and activate it again.
Activating the light
You can set the hob to activate the light automatically
whenever you activate the hob. To do so set the
automatic mode to H1 – H6.
IMPORTANT
The light on the hood deactivates 2 minutes after
deactivating the hob.
14 15OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
HELPFUL HINTS AND TIPS
TIPS & INFORMATION
TIPS & INFORMATION
TIPS & INFORMATION
ENVIRONMENTAL TIPS
TIPS & INFORMATION
TIPS & INFORMATION
IMPORTANT
Use the induction cooking zones with correct cookware.
Cookware for induction cooking zones
IMPORTANT
For induction cooking zones a strong electromagnetic
field creates the heat in the cookware very quickly.
Cookware material
• Correct: cast iron, steel, enamelled steel, stainless
steel, the bottom made of multi-layer (with correct
mark from a manufacturer).
• Not correct: aluminium, copper, brass, glass,
ceramic or porcelain.
Cookware is correct for an induction hob if ...
• Some water boils very quickly on a zone set to the
highest heat setting.
• A magnet pulls on to the bottom of the cookware.
IMPORTANT
The bottom of the cookware must be as thick and flat as
possible. Cookware dimensions: induction cooking zones
adapt to the dimension of the bottom of the cookware
automatically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of different materials
(Sandwich construction).
• whistle sound: you use one or more cooking zones
with high power levels and the cookware is made of
different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to appliance
malfunction.
If unfamiliar with induction units, please first compare
the operating sounds of a demonstration model at your
retailer before calling service. If a service call is placed and
the sounds are normal, you will be charged for the visit.
Hints and Tips for Hob²Hood function
When you operate the hob with Hob2Hood function:
• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob panel.
• Do not interrupt the signal between the hob and
the hood (for example with a hand or a cookware
handle).
(Hood in the picture is only an example).
IMPORTANT
It may happen that other remote controlled appliances
may block the signal. To avoid it do not operate the
remote of the appliance and the hob at the same time.
Rangehoods with the Hob²Hood function
To find the full range of rangehoods which work with this
function refer to our consumer website. The Electrolux
rangehoods that work with this function must have the
symbol
Examples of cooking applications
The relation between the heat setting and the cooking
zone consumption of power is not linear. When you
increase the heat setting it is not proportional to the
increase of the cooking zone consumption of power.
It means that the cooking zone with the medium heat
setting uses less than a half of its power.
IMPORTANT
The data in the table is for guidance only.
HEAT
SETTING
1
1-2 Hollandaise sauce, melt: butter,
1-2 Solidify: fluffy omelettes, baked eggs 10-40 min Cook with a lid on
2-3 Simmer rice and milk based dishes, heating
3-4 Steam vegetables, fish, meat 20-45 min Add some tablespoons of liquid
4-5 Steam potatoes 20-60
4-5 Cook larger quantities of food, stews and
6-7 Gentle fry: escalope, veal cordon bleu,
7-8 Heavy fry, hash browns, loin steaks, steaks 5-15 min Turn halfway through
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
USE TO: TIME HINTS
Keep warm the food you cooked as
required
chocolate, gelatine
up ready-cooked meals
soups
cutlets, rissoles, sausages, liver, roux, eggs,
pancakes, doughnuts
5-25 min Mix from time to time
25-50 min Add the minimum twice as much liquid as
min
60-150
min
as
required
Put a lid on a cookware
rice, mix milk dishes part procedure through
Use max. 1⁄4 L water for 750g of potatoes
Up to 3 L liquid plus ingredients
Turn halfway through
The Power function is best to heat up large quantities of water.
Energy saving
ENVIRONMENT
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
16
16 HELPFUL HINTS AND TIPS 17HELPFUL HINTS AND TIPS
TIPS & INFORMATION
CARE AND CLEANING
TROUBLESHOOTING
Care and cleaning
Clean the appliance after each use. Always use cookware
with clean bottom.
IMPORTANT
Scratches or dark stains on the glass ceramic have no
effect on how the appliance operates.
To remove the dirt:
1. Remove immediately: melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
damage to the appliance. Use a special scraper for
the glass. Put the scraper on the glass surface at an
acute angle and move the blade on the surface.
Remove after the appliance is sufficiently cool:
limescale rings, water rings, fat stains, shiny metallic
discolorations. Use a special cleaning agent for glass
ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some
detergent.
3. At the end rub the appliance dry with a clean cloth.
PROBLEM POSSIBLE CAUSE AND REMEDY REMEDY
You cannot activate
or operate the hob.
An acoustic signal
sounds and the
hob deactivates.
An acoustic signal
sounds when the
hob is deactivated.
The hob deactivates. You put something on the sensor field. Remove the object from the sensor field.
The hob is not connected to an electrical
supply or it is connected incorrectly.
The fuse is blown. Make sure that the fuse is the cause of the
You do not set the heat setting for 10
seconds.
You touched 2 or more sensor fields at the
same time.
There is water or fat stains on the control
panel.
You put something on one or more sensor
fields.
Check if the hob is correctly connected to
the electrical supply. Refer to the connection
diagram.
malfunction. If the fuse is blown again and
again, contact a qualified electrician.
Activate the hob again and set the heat
setting in less than 10 seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sensor fields.
Residual heat
indicator does not
come on.
Hob²Hood does not
work.
Automatic Heat Up
does not operate.
The heat setting
changes between
two levels.
The sensor fields
become hot.
There is no sound
when you touch the
panel sensor fields.
The zone is not hot be cause it operated only
for a short time or the sensor is damaged.
You covered the control panel. Remove the object from the control panel.
You use a very tall pot which blocks the
signal.
The zone is hot. Let the zone become sufficiently cool.
The highest heat setting is set. The highest heat setting has the same power
Power management operates. Refer to "Daily use".
The cookware is too large or you put it too
near to the controls.
The sounds are deactivated. Activate the sounds. Refer to "Daily use".
If the zone operated sufficiently long to be
hot, speak to an Authorised Service Centre.
Use a smaller pot, change the cooking zone
or operate the hood manually.
as the function.
Put large cookware on the rear zones, if
possible.
18 CARE AND CLEANING
comes on.
Child Safety Device or Lock operates. Refer to "Daily use".
19TROUBLESHOOTING
TROUBLESHOOTING (CONTINUED) NOTES
PROBLEM POSSIBLE CAUSE AND REMEDY REMEDY
comes on.
and appear
alternately
and appear
alternately
and appear
alternately
You hear a beep
sound, the indicators
above
and the SenseBoil®
function does not
start.
blink
There is no cookware on the zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer to "Hints and
tips".
The diameter of the bottom of the cookware
is too small for the zone.
The power is too low due to unsuitable
cookware or an empty pot.
The pot is empty or contains some liquid
other than water, e.g. oil.
"There is too much or too little water in the
pot.
You boiled some food other than water and
potatoes. The boiling point was moved in
time and the SenseBoil® function could not
work properly."
None of the cooking zones is ready to be
used with the SenseBoil® function. There is
some residual heat on the cooking zones you
want to choose or they are still in use.
Use cookware with correct dimensions. Refer
to "Technical data".
"Use the appropriate type of cookware. Refer
to "Hints and Tips" and "Technical Data".
Do not activate any zone with an empty pot
on it."
Avoid using the function with liquids other
than water.
Refer to "Hints and Tips". Only boil water and
potatoes with the use of SenseBoil®.
Finish your previous cooking activities and
choose a free cooking zone without any
residual heat.
and a number
come on.
You can hear a
constant beep noise.
There is an error in the hob. Deactivate the hob and activate it again
The electrical connection is incorrect. Disconnect the hob from the electrical supply.
8.2 If you cannot find a
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of
the glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not be
free of charge, also during the warranty period.
The instructions about the Service Centre and conditions
of guarantee are in the guarantee booklet.
after 30 seconds. If comes on again,
disconnect the hob from the electrical
supply. After 30 seconds, connect the hob
again. If the problem continues, speak to an
Authorised Service Centre.
Ask a qualified electrician to check the
installation.
21NOTES20 TROUBLESHOOTING
NOTES
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: WESTINGHOUSE BUILT-IN OVENS, COOKTOPS AND
FREESTANDING COOKER
This document sets out the terms and conditions of the product
warranties for Westinghouse Appliances. It is an important
document. Please keep it with your proof of purchase documents
in a safe place for future reference should there be a manufacturing
defect in your Appliance. This warranty is in addition to other rights
you may have under the Australian Consumer Law.
1. In this warranty:
(a) ‘ACL’ or ‘Australian Consumer Law’ means Schedule 2 to the
Competition and Consumer Act 2010;
(b) ‘Appliance’ means any Electrolux product purchased by you and
accompanied by this document;
(c) ‘ASC’ means Electrolux’s authorised serviced centres;
(d) ‘Westinghouse’ is the brand controlled by Electrolux Home Products
Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004
762 341 in respect of Appliances purchased in Australia and Electrolux
(NZ) Limited (collectively “Electrolux”) of 3-5 Niall Burgess Road, Mount
Wellington, in respect of Appliances purchased in New Zealand;
(e) ‘WarrantyPeriod’meanstheperiodspeciedinclause3ofthis
warranty;
(f) ‘you’ means the purchaser of the Appliance not having purchased
the Appliance for re-sale, and ‘your’ has a corresponding meaning.
2. Application: This warranty only applies to new Appliances, purchased
and used in Australia or New Zealand and is in addition to (and does not
exclude, restrict, or modify in any way) other rights and remedies under
a law to which the Appliances or services relate, including any nonexcludable statutory guarantees in Australia and New Zealand.
3. Warranty Period: Subject to these terms and conditions, this warranty
continues in Australia for a period of 24 months and in New Zealand
for a period of 24 months, following the date of original purchase of the
Appliance.
4. Repair or replace warranty: During the Warranty Period, Electrolux
or its ASC will, at no extra charge if your Appliance is readily accessible
for service, without special equipment and subject to these terms and
conditions, repair or replace any parts which it considers to be defective.
Electrolux may, in its absolute discretion, choose whether the remedy
oeredforavalidwarrantyclaimisrepairorreplacement.Electroluxorits
ASC may use refurbished parts to repair your Appliance. You agree that
any replaced Appliances or parts become the property of Electrolux.
5. Travel and transportation costs: Subject to clause 7, Electrolux will
bear the reasonable cost of transportation, travel and delivery of the
Appliance to and from Electrolux or its ASC. Travel and transportation will
be arranged by Electrolux as part of any valid warranty claim.
6. Proof of purchase is required before you can make a claim under this
warranty.
7. Exclusions: You may not make a claim under this warranty unless the
defect claimed is due to faulty or defective parts or workmanship. This
warranty does not cover:
(a) lightglobes,batteries,ltersorsimilarperishableparts;
(b) parts and Appliances not supplied by Electrolux;
(c) cosmeticdamagewhichdoesnotaecttheoperationofthe
Appliance;
(d) damage to the Appliance caused by:
(i) negligence or accident;
(ii) misuse or abuse, including failure to properly maintain or service;
(iii) improper, negligent or faulty servicing or repair works done by
anyone other than an Electrolux authorised repairer or ASC;
(iv) normal wear and tear;
(v) power surges, electrical storm damage or incorrect power supply;
(vi) incomplete or improper installation;
(vii) incorrect, improper or inappropriate operation;
(viii) insect or vermin infestation;
(ix) failure to comply with any additional instructions supplied with
the Appliance;
In addition, Electrolux is not liable under this warranty if:
(a) the Appliance has been, or Electrolux reasonably believes that the
Appliance has been, used for purposes other than those for which
the Appliance was intended, including where the Appliance has
been used for any non-domestic purpose;
(b) theApplianceismodiedwithoutauthorityfromElectroluxinwriting;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced
8. How to claim under this warranty: To enquire about claiming under
this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
9. Australia: For Appliances and services provided by Electrolux in
Australia: Electrolux goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to
have the Appliance repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a major failure.
‘Acceptable quality’ and ‘major failure’ have the same meaning as
referred to in the ACL.
10. New Zealand: For Appliances and services provided by Electrolux
in New Zealand, the Appliances come with a guarantee by Electrolux
pursuant to the provisions of the Consumer Guarantees Act, the Sale
of Goods Act and the Fair Trading Act. Where the Appliance was
purchased in New Zealand for commercial purposes the Consumer
Guarantee Act does not apply.
11.Condentiality: You accept that if you make a warranty claim, Electrolux
and its agents including ASC may exchange information in relation to you
to enable Electrolux to meet its obligations under this warranty.
NOTES
Before calling for service, please ensure that the steps listed in clause 8 above have been followed.
AUSTRALIA
NEW ZEALAND
WCook_Warr_Jul19
Important Notice
FOR SERVICE
ortondtheaddressofyournearest
authorised service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call
FOR SERVICE
ortondtheaddressofyournearest
authorised service centre in New Zealand
PLEASE CALL 0800 10 66 10
FOR SPARE PARTS
ortondtheaddressofyournearest
spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call
FOR SPARE PARTS
ortondtheaddressofyournearest
spare parts centre in New Zealand
PLEASE CALL 0800 10 66 20
WARRANTY
2322
For more information on all Westinghouse
appliances, or for dimension and installation
information, call into your retailer, phone or email
our customer care team or visit our website:
AUSTRALIA
phone: 13 13 49
email: customercare@electrolux.com.au
web: westinghouse.com.au
NEW ZEALAND
phone: 0800 10 66 20
email: customercare@electrolux.co.nz
web: westinghouse.co.nz
and WESTINGHOUSE are trademarks of Westinghouse Electric Corporation.
Used under license. All Rights Reserved.
Part Number: A19136404 Issue E
© 2019 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
WMAN_Induction_Jan20
Loading...