Westinghouse SK-26H590D, SK-32H590D User Manual
USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
SK-26H590D
SK-32H590D
Widescreen DVD Combo
Combo Lecteur à Écran Géant
Combo DVD Pantalla Grande
INDEX
IMPORTANT INFORMATION............................................................2
1. WARNING.......................................................................................2
2. SAFETY GUIDELINES...................................................................3
3. IMPORTANT SAFETY INSTRUCTIONS........................................4
4. ANTENNA INSTALLATION SAFETY.............................................6
5. CLEANING THE LCD TV.........................................................6
6. DISC.......................................................................................7
PREPARATION............................................................9
1. PACKAGE CONTENTS...................................................9
2. TV CONTROLS..................................................................10
3. TERMINALS.......................................................................11
4. REMOTE CONTROL......................................................................12
INSTALLATION.............................................................................................14
1. INSERT BATTERIES IN THE REMOTE CONTROL...................................14
2. ANTENNA CONNECTION...........................................................................15
3. EXTERNAL DEVICE CONNECTIONS........................................................16
4. POWER CONNECTION..............................................................................18
5. INITIAL SETUP............................................................................................18
BASIC OPERATION.....................................................................21
1. TURNING ON AND OFF THE POWER................................21
2. SOUND VOLUME...............................................................21
3. CHANGING CHANNELS............................................................................22
4. INPUT SELECTION............................................................................22
5. SELECTING MENU ITEMS............................................................23
MENU OPERATION................................................................24
1. VIDEO.............................................................................................25
2. AUDIO..........................................................................................29
3. CHANNELS..................................................................................33
4. LOCKS.............................................................................................37
5. SETTINGS.........................................................................................42
6. ADVANCED..............................................................................52
7. GUIDE..........................................................................................55
PLAY DISC...........................................................................56
1. PLAYBACK PROCEDURE......................................................................56
2. SPECIAL PLAYBACK..................................................................57
3. DVD SETTINGS.....................................................................58
MP3/WMA/JPEG CD Playback.......................................................59
1. MP3/WMA/JPEG CD information.............................................59
2. MP3/MWA CD playback..................................................................60
3. JPEG CD playback...................................................................60
SPECIFICATIONS...........................................................................61
TROUBLESHOOTING....................................................................63
APPENDIX.......................................................................................64
APPENDIX A: Remove the base...................................................64
1
IMPORTANT INFORMATION
1. WARNING
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
COUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head symbol,
within an quilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence
of important operating and maintenance
(servicing ) instructions in the literature
accompanying the product.
2
2. SAFETY GUIDELINES
IMPORTANT INFORMATION
WARNING: This device must be operated with the original power supply.
CAUTION:
Always use the appropriate AC cord that is certifi ed for your specifi c country. Some examples are listed below:
The power supply outlet should be located near the LCD TV and should be easily accessible.
USA..................UL Canada.............CSA
Japan ............... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this LCD TV is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet
IEC-60320 requirements and should look like Figure A1 below:
•For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
For LCD TVs that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD TVs
placed directly on the fl oor, only SJT type cord sets may be used. The cord set must be selected according to
the current rating for the LCD TV. Please consult the table below for the selection criteria for power cords used
in the United States and Canada.
Cord Type Size of Conductors in Cord
18 AWG
SJT
SVT
16 AWG
14 AWG
18 AWG
17 AWG
Maximum Current Rating of Unit
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
•FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and
may cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the LCD TV and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.
English
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a
shielded BNC (5) cable. Also, any unauthorized changes or modifi cations not expressly approved by
will void the user's authority to operate this device.
3
IMPORTANT INFORMATION
3. IMPORTANT SAFETY INSTRUCTIONS
Follow and obey all warnings and instructions marked on the LCD TV. For your safety, please read all the
safety and operating instructions before you operate the LCD TV. Keep this user’s manual for future reference.
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(4) Follow all instructions.
(5) Do not use the LCD TV near water.
(6) Clean only with a dry cloth.
(7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
(8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
(9) Do not attempt to bypass the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. If the provided plug does not fi t into your wall outlet, consult an electrician for replacement of the
obsolete outlet.
(10) Protect the power cord from being walked on or pinched particularly at the ends of the cord.
(11) Only use attachments/accessories specifi ed by the manufacturer.
(12) Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with
the LCD TV. When a cart is used, use caution when moving the cart to avoid injury or damage.
(13) Unplug the LCD TV during lightning storms or when it is not being used for a long period of
time.
(14) Refer all servicing to qualifi ed service personnel. Servicing is required when the LCD TV
has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the LCD TV, it has been exposed to rain or moisture,
it does not operate normally, or the TV has been dropped.
(15) DISC SLOT – Keep your fi ngers well clear of the disc slot as it is closing. It may cause serious personal
injury.
(16) LASER BEAM – Do not look into the opening of the disc slot or ventilation opening of the product to see
the source of the laser beam. It may cause sight damage.
(17) DISC – Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause
serious personal injury and product malfunction.
•Overloading
Do not overload wall outlets, extension cords, or power strips. This can result in fi re or electronic shock.
•Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them. Periodically inspect the cords and each end of the cords for damage. The LCD TV shall
be installed a near the wall socket outlet and the plug on power cord shall be readily accessible.
•Ventilation
The slots and openings on the cabinet are provided for necessary ventilation. To ensure reliable operation of
the LCD TV and to protect it from overheating, these slots and openings must never be blocked or covered.
4
IMPORTANT INFORMATION
•Never cover the slots and openings with a cloth or other materials.
English
8
8
•Do not block the openings by placing the LCD TV on a bed, sofa, rug or other
similar surface.
•Do not place the LCD TV in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instruction have been
adhered to.
•Other Notices
Avoid exposing the LCD TV to direct sunlight or high temperatures.
・
Avoid exposing the LCD TV to moisture or high humidity
・
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairsb by
・
anyone not authorized by Vivitek.
If your LCD TV will not be used for a long period of time, unplug the LCD TV and remove
・
the batteries from the remote control.
•Precautions
Avoid touching the screen by hand or any object.
・
Never remove the rear cover. Your LCD TV contains high-voltage parts. You may be seriously
・
injured if you touch them.
Avoid exposing your LCD TV to direct sunlight or another heat source. Orient your LCD TV
・
away from direct sunlight to reduce glare.
Always handle your LCD TV with care when moving it.
・
Place your LCD TV in a well-ventilated area; don’t place the LCD TV in airtight
・
compartments. Do not place anything on your LCD TV that prevents heat dissipation.
Ensure that the area around the LCD TV is clean and free of moisture.
・
Do not place heavy objects on the LCD TV, audio/video cables, or power cord.
・
If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and
・
contact the Vivitek Service Center.
・
WARNING
–
The LCD TV shall not be exposed to dripping or splashing and objects fi lled
with liquids, such as vases, shall not be placed on the TV.
・
WARNING – Don’t use hand or other things to touch the LCD screen.
5
IMPORTANT INFORMATION
4. ANTENNA INSTALLATION SAFETY
•Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is
grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code,
ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70
Antenna lead-in wire
Ground clamps
Electric service
equipment
NEC: National Electrical Code
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Ground clamps
Power service grounding
electrode system
(NEC Art 250 Part H)
•Lightning
Z
Z
Z
For added protection for the LCD TV during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the LCD TV due
to lightning and power-line surges.
•Power Lines
An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be fatal.
5. CLEANING THE LCD TV
MAKE SURE THE LCD TV IS TURNED OFF AND POWER CORD IS
・
REMOVED.
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR
・
CASE.
•To clean the screen:
1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2.If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto
a clean, soft, lint-free cloth, and wipe the screen.
•To clean the case:
1.Use a soft, dry cloth.
2.If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non- abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
6
IMPORTANT INFORMATION
6. DISC
6-1 On handling discs
• Be sure to hold the edge of disc. Do not touch the surface of the disc.
• Do not attach paper or tape to discs.
Playback side
6-2 On cleaning discs
• Wipe the disc with a clean, dry cloth from the center outward toward the edges.
• Do not wipe the disc in a circular motion around the center.
• Do not use liquid or aerosol cleaners.
6-3 ON storing discs
• Store the disc in the case to avoid any risk of scratches, dirt or damage.
• Do not leave the disc exposed to disc exposed to direct sunlight or in hot or humid places.
English
6-4 Playable discs
In this unit, use only discs that meet the standard, such as DVD-Video,DVD-R/RW (Video format
only), Audio CD,CD-R/CD-RW(CD-DA, MP3, WMA or jpeg format) . If you use a non-standard
disc, we cannot guarantee playback. Even if such a disc can be played back, we cannot
guarantee the image or sound quality.
This unit is designed to playback music Compact Discs (CD) that conform to the CD standard.
•
CDs that contain (copy-restriction) signals to protect copyrights cannot be played back.
Some CD-R/RWs and DVD-R/RW cannot be played back depending on the recording
•
conditions.
When you play an 8 cm disc, you need the adapter (not supplied).
•
7
IMPORTANT INFORMATION
6-5 Region management information
The region number of this unit is 1. If region numbers, which stand for their playable area, are
printed on your DVD video disc and you do not fi nd " 1 " or " ALL " , disc playback will not be
allowed by the player. (In this case, the unit will display a message on-screen.)
Some DVDs that have no region code label may still be subject to area restrictions and therefore
not playable.
6-6 Structure of disc contents
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters.
DVD video disc
Title 1
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Video CDs and Audio CDs are divided into tracks.
Video CD/Audio CD
Track 1
Track 2 Track 3 Track 5Track 4
Title 2
Each title, chapter or track is assigned a number, which is called “title number”, “chapter number”
or “track number” respectively.
6-7 Notes on copyright
The unauthorized recording, use, distribution, or revision of copyrighted materials including,
without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright
Laws of the United States and other countries, and may subject you to civil and criminal liability
8
1. PACKAGE CONTENTS
26"/32” LCD TV/DVD COMBINATION Remote Control x1 (with 2 pcs AAA batteries)
User manual x1 Power cord x1
User manual
PREPARATION
English
Quick Connect Guide x1 Warranty card x1
Quick Connect Guide
9
Warranty card
PREPARATION
2. TV CONTROLS
1. MENU
2. VOL + / -
3. CH + / -
4. INPUT
5.
6.
7.
8.
9.
10. ●
10
Turn the Menu ON/OFF
Adjust (VOL + / -) sound volume or adjust a highlighted control while in the Menu.
Adjust (CH + / -) channel when input is TV or adjust a highlight control while in the
Menu.
Select Active Video Input or choose a selection while in the MENU.
Play & Pause button, to play or pause
Backward:Press once for fast backward; Press and hold for Chapterbackward
Forward:Press once for fast forward; Press and hold for Chapterforward
Stop button. Press once to stop and remember last position; Press twice or more to
stop and return to top menu after re-playing;Press and hold for 2 sec. to eject the disc.
Power ON/OFF
AC Reset. When the TV Shuts down or the remote control doesn't work. You can push
it with a needle.
10
3. TERMINALS
PREPARATION
16
15
13
1
1. VGA Audio IN
Connect to the Audio out (Green) from a
computer.
2
2. VGA
Using a 15-pin VGA cable, connect to a
computer or other device with a VGA output.
4
6
11
3
3. YPbPr1 Input
Connect an external video device with
component output to these jacks.
5
4. YPbPr2 Input
Connect an external video device with
component output to these jacks.
8
5. YPbPr1 Audio 1 Input (Left / Right)
Connect an external audio source to this jack.
7
6. YPbPr2 Audio 2 Input (Left / Right)
Connect an external audio source to this jack.
7. HDMI 1/2
Connect to an external video device such as
DVD players, Game System, Cable, or Satellite
boxes
8. HDMI Audio Input (Right / Lift)
Connect external analog audio to this jack
9
10. Video Input
Connect the Composite Video to an external
video device such as VCR, DVD or video game
12
10
system.
11. S-Video Input
12
Connect to an external video device such as
a digital cable/satellite receiver, VCR, DVD or
14
video game system.
12. Video& S-Video Audio Input (Right / Left)
Connect an external audio source to this jack;
(Audio (R/L)).This connection supports either
S-Video or Video input.
13. SPDIF Audio Output
Connect this output to an external digital audio
receiver.
14. Analog Audio Output (Right / Left)
Connect this output to an external audio
receiver.
15. ANT (RF-input)
Connect the LCD TV to an antenna or cable
service. Such as NTSC, ATSC, or Cable.
English
11
PREPARATION
4. REMOTE CONTROL
Remote Control
1.POWER Switch TV power On/Off.
2.Mute Mutes the sound.
3.DVD Eject Eject the DVD disc.
4.PC Select VGA source input.
5.DVD Select DVD source input.
6.TV Select TV (NTSC/ATSC) source
input.
HDMI Select HDMI 1/HDMI 2 source input.
7.
VIDEO Select Video/S-video input.
8.
YPbPr
9.
Favorite
10.
channel.Press Favorite (A, B, C) key
to access favorite list.Use arrow
keys and enter key to select, add
the channel from favorite list.(See
more detail on page 35)
Channel
11.
number keys
Enter Execute a command.
12.
Ch▲/▼ TV Channel Up/ Down adjustment.
13.
Input Select input source.
14.
Aspect Ratio
15.
►Note:
Before setting up favorite channel, please make
sure channel list is saved in TV. If not, perform
channel scan to save a channel list in TV.
Select YPbPr1/YPbPr2 source input.
Select, remove or add your favorite
Select specifi c channel.
Select Video Display format
12
PREPARATION
Remote Control
16.Vol +/- Volume Up / Down adjustment.
17.Last CH Switch to previous channel.
18.Menu Display the menu screen.
19.▲/▼/◄/► Selects a desired item on the
screen.
Enter
20.
21.
INFO
information.
Guide Show program information of current
22.
channel.
DVD (Setup) Press when there is a disc in the player
23.
button to open or close the setup screen.
Execute a command.
Display the source and channel
English
■
(Stop)
24.
►
25.
playback.
●Pause: Press during playback to
pause. Press again to resume
playback.
DVD Menu Use to display or close the DVD menu
26.
screen.
(Skip Forward)
27.
or tracks.
28.
button scanning.
29.
button scanning.
30.
button tracks.
13
(Play &Pause)
(Fast-Forward)
(Fast-Reverse)
(Skip Reverse)
Press to stop playback.
●Play: Press to start or resume
Skip to the next chapter
Press to perform fast-forward
Press to perform fast-reverse
Skip to the previous chapter or
INSTALLATION
1. INSERT BATTERIES IN THE REMOTE CONTROL
(1) Remove the battery cover.
(2) Insert the batteries corresponding to the (+) and (−) marks on the battery compartment.
(3) Re-attach the battery cover.
CAUTION:
(1) Only use AAA batteries.
(2) Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fi re
risk or lead to personal injury.
(3) Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result in
cracking or leakage, which may pose a fi re risk or lead to personal injury.
(4) Dispose of used batteries in accordance with local laws and regulations.
(5) Keep batteries away from children and pets.
(6) When the remote control will not to be used for an extended period, remove the
batteries.
TRANSMISSION RANGE OF REMOTE CONTROL
・
Transmission range depends upon the receive angle, the remote angle coverage is 25° Left/Right,
20° Up/Down from the LCD TV 20 Feet.
14
2. ANTENNA CONNECTION
INSTALLATION
2-1 Outdoor Antenna Connection
Cable TV lead-in
VHF, UHF or
VHF/UHF combination
antenna
75 ohm coaxial cable (round)
or
300 ohm twin-lead (flat)
Separate VHF/UHF Antenna
VHF ANTENNA
►Notice:
F-type connector should be fi nger-tightened only.
When connecting the RF cable to the TV set, do not tighten F-type connector with tools.If
tools are used, it may cause damage to your TV set.(The breaking of internal circuit, etc.)
F-type connector
75-ohm coaxial cable
or
UHF ANTENNA
300 ohm twin-lead
300 ohm twin-lead
75 ohm coaxial cable
300-75 ohm ADAPTOR
(Not supplied)
COMBINER
(Not supplied)
IN
OUT
Home Antenna
terminal (75 ohm)
English
RF IN
2-2 Cable TV (CTV/DTV) Connection
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial
・
cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels
・
are scrambled, a cable TV converter/ descrambler is generally provided to the subscriber by the cable TV
company. This converter/ descrambler is necessary for normal viewing of the scrambled channels. (Set your
TV on channel 3 or 4. Typically one of these channels is used. If channel is unknown, consult your cable TV
company.) For more specifi c instructions on installing cable TV, consult your cable TV company.
One possible method of utilizing the converter/ descrambler provided by your cable TV company is explained
below.
"A" position on the RF switch (not supplied): You can view all unscrambled channels by using the TV's
channel keys.
"B" position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler by using the converter's channel keys.
RF switch (not supplied)
OUT IN
Cable TV converter/
descrambler
(not supplied)
15
Two-set
signal
splitter
(not
supplied)
Cable TV line
INSTALLATION
3. EXTERNAL DEVICE CONNECTIONS
You can enjoy picture and sound by connecting a DVD or video game system to the terminals located on
the rear of the LCD TV set.
When connecting an external device, turn off the power of the LCD TV set fi rst to prevent any possible
damage.
ø 3.5 mm stereo
mini jack cable
Audio
PC
Component cable
Pr
Pb
Y
Audio cable
Audio (L)
Audio (R)
DVD player
* If your external device has a
component terminal, COMPONENT
connection is recommended
(you can view high-quality pictures).
Digital TV tuner
RGB
cable
Audio cable
DVI-HDMI conversion cable
HDMI
HDMI
VGA
DVI
HDMI
DVD Player
( with DVI terminal)
DVD Player
( with HDMI terminal)
Note: 100 ~130 VAC
IMPORTANT: Before connect, make sure all devices are turned off.
16
Audio/Video cable
Video
Audio (L)
Audio (R)
S-Video
S-Video cable
Home video
game system
* If your external device has an S-video
terminal, S-VIDEO connection is
recommended.
Camcorder
VCR
INSTALLATION
English
Audio/Video cable
Audio (R)
Audio (L)
Antenna cable
Cable system or antenna
Optical fiber cable
AUDIO OUT
Audio amplifier
AUDIO OUTPUT
terminal
• For the cable, use a commercially available audio/video cable.
• For more information about external device connections, see the operation manuals of your external
devices.
• Make sure that the corresponding cables are connected to each terminal. Connecting other cables
may result in a malfunction.
• VIDEO and S-VIDEO terminals: If your external device has an S-VIDEO terminal, S-VIDEO connection
is recommended. S-Video provides a fi ner, more detailed picture. If both terminals are connected,
S-VIDEO terminal takes a priority.
• Component Input (YPbPr): Picture can be displayed only when 480I, 480P, 720P or 1080I signal is
received.
• HDMI Input: Picture can be displayed only when 640×480, 480P, 720P or 1080I signal is received.
• When you connect to the HDMI terminal with the DVI- HDMI conversion cable, it may not be possible
to display the picture correctly.
• This TV does not support DTS audio format. You may not hear proper audio output from TV speakers
if choosing DTS audio format.
Outputting Audio
You can output audio signals from the LCD TV set through the ANALOG AUDIO OUT terminals and the
DIGITAL AUDIO OUT terminal.
17
INSTALLATION
4. POWER CONNECTION
Connect the power cord to the DVD combo LCD TV then to a proper AC outlet.
IMPORTANT: The power input voltage is 120VAC, 60 Hz ONLY, Before beginning, make sure all devices
are turned off.
5. INITIAL SETUP
When you setup the LCD TV for the fi rst time or Reset all on OSD menu is pressed, the Setup Wizard will
be initialized. The Setup Wizard provides guided assistance in confi guring the LCD TV to your preference
language, Time Zone, Daylight Saving, RF Input Source and Scanning Channel by sequence. You can select
your favorite settings step by step.
18
Power
INSTALLATION
Setup Wizard
(1) Press "▲ / ▼ " to select the language for menu and message showing on your TV, press Enter key to exit
Setup Wizard menu.
Press ENTER to access Time Zone settings.
(2)
Press " / " to select on your time zone.
English
(3) Press ENTER to access Daylight Saving screen.
Press " / " to select “Yes” or “No”, when you observe daylight saving.
19
Loading...