Westinghouse 6900000 Instruction Manual

Owner’s Manual

Guide d’utilisation
Manual del Usuario

Indoor Lighting Fixture
Installation Instructions

Instructions d'installation
Appareil d'éclairage pour utilisation intérieure

Instrucciones para la insalación
de la lámpara para interiores

W-301

102506

Please write model number here for future reference: / Veuillez noter le numéro de mod­èle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
[e-mail].

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.

WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear,
do not proceed. Contact a qualified electrician. Read all instructions
before beginning. Proper wiring is essential for safe operation of this fix­ture. When cutting or drilling into walls or ceilings, do not damage electri­cal wiring, gas lines, or water lines. If any of the fixture or wiring compo­nents are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet. This fixture
employs a grounded type receptacle and is not intended for connection to
a two wire ungrounded source of supply.

Applicable only to portable lamps:
To reduce the risk of electrical shock, all portable lamps have a polarized
plug (one blade is wider than the other). This plug will fit into a polarized
outlet only one way. If plug does not fit, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully plugged into the extension cord. Do not alter the plug.

2

FIGURE 1.

INSET 1

HEX NUT 2.

HEX NUT 1.

GROUND
WIRE

HEX NUT 2
(D2)

MOUNTING
NIPPLE (G)

CHAIN (J)

*OUTLET

BOX (B)

WIRE
CONNECTORS (AA)

GREEN GROUNDING
SCREW (BB)

SIDE HOLE (CC)

MOUNTING BAR (A)
*OUTLET BOX

SCREWS (C)

LOCK WASHER (E)
HEX NUT 1 (D1)
SCREW

COLLAR (F)

CANOPY (H)

SCREW COLLAR RING (I)

INSET 2

HEX NUT 2.
HEX NUT 1.

NIPPLE (Q)

TOP
COVER (O)

FIXTURE
BODY (M)

FIXTURE
PLATE (S)

BALL
NUT (T)

FIXTURE
LOOP (P)

CENTER
PIPE (L)

SIDE
PIPE (N)

DECORATIVE
CAP (R)

RETAINING
RING (X)

SPACER (W)

GLASS
SHADE (U)

SOCKET (V)

FIXTURE
ARM (K)

TOOL (Z)

Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.

3

*NOT SUPPLIED

MOUNTING, WIRING AND ASSEMBLY INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fix­tures meet all UL specifications.

1. Turn off power at circuit box to avoid possible electric shock.

2. Attach mounting bar (A) to outlet box (B) with outlet box screws (C)

3. If not pre-assembled; thread hex nut 1 (D1), lock washer (E), hex nut 2 (D2) and screw collar
(F) onto mounting nipple (G) making sure you leave at least 1/4 “ space between hex nut 1 (D1)
and hex nut 2 (D2).

NOTE: Assemble the entire fixture on the floor. Be sure the canopy (H) (not shown to scale) and the
screw collar ring (I) are positioned on the chain (J) as shown in figure 1.

4. To assemble fixture, unfold fixture arms (K) to proper position.

5. Screw center pipe (L) onto the top of the fixture body (M) until snug.

6. Insert side pipe(s) (N) into hole beneath top cover (O), then insert bottom of side pipe(s) (N) into
holes in fixture arm(s) (K).

7. Screw fixture loop (P) onto nipple (Q) fixture top cover (O) (if applicable).

8. Install decorative cap (R) beneath fixture plate (S) and secure with ball nut (T).

9. Place glass shade(s) (U) over socket(s) (V) and secure with spacer(s) (W) and retaining ring(s) (X)
using tool (Z).

10. Install lamp(s). Do not exceed recommended wattage.

NOTE: It may be necessary, and is recommended, to use two people when attaching the fixture to the
mounting bar (A) and completing the wiring and adjustments.

11. Open 1 link on bottom end of chain (J), and attach to fixture loop (P). Securely close loop
on chain (J).

12. Determine desired chain (J) length and shorten accordingly. Lace fixture wires up through
every other link of chain(J), screw collar ring (I), canopy (H), screw collar (F) and out through top
of mounting nipple (G). Attach top of chain (J) to screw collar (F).

13. Hook mounting nipple (G) into opening of mounting bar (A) so that hex nut 2 (D2) sits
firmly behind the lip of mounting bar (A) and tighten hex nut 1 (D1) (see inset 1).

14. Connect fixture wires from top of mounting nipple (G) to the outlet box wires with wire
connectors (AA) (see inset 2).

15. To connect wires, take black fixture wire (group A from fig. 2 on page 11) and place evenly
against black outlet box wire. Do not twist wires.

16. Fit wire connector (AA from fig. 1) overwires and twist until there is a firm connection. If wire
connector (AA) easily comes off, reattach wire connector (AA) and check again for a firm connection.

17. Repeat steps 15 and 16 with the white (group B from fig. 2) fixture wire and outlet box wires.

18. Partially thread green grounding screw (BB) into side hole (CC) on mounting bar (A)

19 Wrap ground wire from fixture around green grounding screw (BB) leaving enough excess

wire to then connect ground wire and outlet box wire with wire connector (AA),
if applicable.

20. Tighten green grounding screw (BB). Do not over tighten.

21. Tuckwires inside outlet box (B).

22. Raise canopy (H) over outlet box (B) and secure screw collar ring (I) onto screw collar (F)
(see insert 2).

NOTE: If adjustment is necessary for proper canopy (H) fit, loosen hex nut 1 (D1) to raise fixture, or
loosen hex nut 2 (D2) to lower fixture. Lower or raise mounting nipple (G) accordingly and retighten
both hex nut 1 (D1) and hex nut 2 (D2).

23. Turn power back on at circuit box.

(not included)

.

(see fig.1.)

4