Westinghouse 6798000 Instruction Manual

Owner’s Manual

Outdoor Lighting Fixture
Installation Instructions

W-040

1/17/04

Please write model number here for future reference: / Veuillez noter le numéro de mod­èle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:

2

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
[e-mail].

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture.

If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of
the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.

WARNINGS

ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are
unclear, do not proceed. Contact a qualified electrician. Read all
instructions before beginning. Proper wiring is essential for safe
operation of this fixture. When cutting or drilling into walls or
ceilings, do not damage electrical wiring, gas lines, or water lines.
If any of the fixture or wiring components are damaged, do not
install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only.
(These warnings are provided on the U.L. label and on the fixture
carton.) Risk of fire. Most dwellings built before 1985 have supply
wires rated 60° C. Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet.
CAUTION: “This fixture employs a grounded type receptacle and is

not intended for connection to a two wire ungrounded source of
supply.”

3

FIGURE 1.

*NOT SUPPLIED

*OUTLET

BOX (C)

THUMB
SCREWS (L)

Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.

CANOPY (I)

GLASS
SHADE (K)

KEY SLOTS (J)

MOUNTING
BAR (B)

GREEN
GROUNDING
SCREW (G)

WIRE
CONNECTORS (F)

GROUND
WIRE

*OUTLET BOX

SCREWS (D)

MOUNTING
SCREWS (A)

SIDE
HOLE (H)

CENTER
HOLE (E)

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal
between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These
fixtures meet all UL specifications.

1. Turn off power at circuit box to avoid possible electric shock.

2. Thread mounting screws (A) into mounting bar (B) approximately 5/8 inch (see fig. 1).

3. Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (not included).

4. Thread wires up through center hole (E) in mounting bar (B.)

5. Identify color coding of fixture wires (see figure 2 on page 11).

6. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against
black outlet box wire. Do not twist wires.

7. Fit wire connector (F from fig. 1) over wires and twist until there is a firm connection. If
wire connector (F) easily comes off, reattach and check again for a firm connection (see
figure 1).

8. Repeat steps 6 and 7 with the white (group B from fig. 2) fixture and outlet box wires.

9. Partially thread green grounding screw (G) into side hole (H) on mounting bar (B)
(see fig. 1).

10. Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box
(C) around green grounding screw (G) on mounting bar (B).

11. Tighten green grounding screw (G). Do not over tighten.

12. Tuck wires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

1. Raise canopy (I) to ceiling allowing mounting screws (A) to protrude through key slots
(J) in canopy (I) (see fig. 1).

2. Rotate canopy (I) clockwise until mounting screws (A) lock into narrow portion of key
slots (J).

3. Install lamp(s). Do not exceed recommended wattage.

4. Secure glass shade (K) into canopy (I) with thumb screws . (L)

5. Turn power back on at circuit box.

4