![](/html/94/9417/941744d4b03b8b73603d8e315839b77b02b0b3a348597a33e800184ad04a40e6/bg1.png)
Owner’s Manual
Indoor Lighting Fixture
Installation Instructions
W-028
020705
Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:
![](/html/94/9417/941744d4b03b8b73603d8e315839b77b02b0b3a348597a33e800184ad04a40e6/bg2.png)
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE
Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
catalogroom@westinghouselighting.com.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).
WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.
This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.
This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of
the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.
WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear,
do not proceed. Contact a qualified electrician. Read all instructions
before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.
NOTE: For fixture employing a grounded convenience outlet. This fixture
employs a grounded type receptacle and is not intended for connection to
a two wire ungrounded source of supply.
Applicable only to portable lamps:
To reduce the risk of electrical shock, all portable lamps have a polarized
plug (one blade is wider than the other). This plug will fit into a polarized
outlet only one way. If plug does not fit, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully plugged into the extension cord. Do not alter the plug.
2
![](/html/94/9417/941744d4b03b8b73603d8e315839b77b02b0b3a348597a33e800184ad04a40e6/bg3.png)
FIGURE 1.
GROUND
WIRE
SIDE HOLE (K)
COTTER PIN (V)
*OUTLET
BOX (G)
WIRE
CONNECTORS (I)
MOUNTING
BAR (C)
HEX NUT (F)
GROUND WIRE WASHER (U)
CANOPY (L)
RAISED
DIMPLES (P)
FLAT WASHER (E)
STAR WASHER (T)
KEY SLOTS (A)
GREEN
GROUNDING
SCREW (J)
*OUTLET BOX
SCREWS (H)
MOUNTING
SCREWS (B)
ROUND NUT 1 (M)
NIPPLE (D)
ROUND NUT 2 (N)
DIFFUSER (O)
DECORATIVE
CAP (Q)
ROUND NUT 3 (R)
FINIAL (S)
Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.
3
*NOT SUPPLIED
![](/html/94/9417/941744d4b03b8b73603d8e315839b77b02b0b3a348597a33e800184ad04a40e6/bg4.png)
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These
fixtures meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Thread mounting screws (B) into mounting bar (C) (see fig. 1).
3. Secure mounting bar (C) to outlet box (G) with outlet box screws (H) (not included).
4. Identify color coding of fixture wires (see fig. 2 on page 11).
5. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against
black outlet box wire. Do not twist wires.
6. Fit wire connector (I from fig. 1) over wires and twist until there is a firm connection. If
wire connector (I) easily comes off, reattach and check again for a firm connection.
7. Repeat steps 5 and 6 with the white (group B from fig. 2) fixture and outlet box wires.
8. Partially thread green grounding screw (J) into side hole (K) on mounting bar (C) (see fig. 1).
9. Wrap ground wire from fixture around green grounding screw (J) leaving enough excess
wire to then connect ground wire and outlet box wire with wire connector (I), if applicable.
10. Tighten green grounding screw (J). Do not over tighten.
11. Tuck wires inside outlet box (G) (see fig. 1).
12. Insert threaded end of nipple (D) with round nut 1 (M) into center hole on canopy (L)
approximately 1/4 inch.
13. Secure star washer (T), ground wire washer (U), flat washer (E) and hex nut (F) on
backside of canopy (L).
14. Insert cotter pin (V) into nipple (D).
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Raise canopy (L) to ceiling allowing mounting screws (B) to protrude through key slots
(A) in canopy (L) and nipple (D) to protrude through center hole in diffusor (O).
2. Secure mounting screws (B) to canopy (L) as necessary .
3. Install lamp(s). Do not exceed recommended wattage.
4. Thread round nut 2 (N) up bottom of nipple (D) approximately 1/4 inch.
5. Raise diffuser (O) up to canopy (L) with nipple (D) protruding through center hole of
diffuser (O).
NOTE: Position diffuser (O) so that longer glass panels rest against raised dimples (P) on
canopy (L).
6. Place decorative cap (Q) over nipple (D) and secure with round nut 3 (R), if applicable,
and finial (S).
7. Turn power back on at circuit box.
4