Westinghouse 6644800 Instruction Manual

Owner’s Manual

Indoor Lighting Fixture Installation Instructions

W-025

082504

Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com.

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture. If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price.

WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet. This fixture employs a grounded type receptacle and is not intended for connection to a two wire ungrounded source of supply.

Applicable only to portable lamps: To reduce the risk of electrical shock, all portable lamps have a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If plug does not fit, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully plugged into the extension cord. Do not alter the plug.

*OUTLET

BOX (L)

BACK

PLATE (G)

SOCKETS (C)

*OUTLET

BOX

SCREWS (Q)

CUPS (B)

SIDE

HOLE (K)

WOOD

SCREWS (M)

FACE

PLATE (A)

BACK PLATE

OPENINGS (H)

OUTER

HOLES (P)

SCREWS (D) (If applicable)

LOCK WASHERS (E) (If applicable)

RINGS (R)

(If applicable)

DECORATIVE

PLATE (F)

(If applicable)

GREEN

GROUNDING

SCREW (J)

FIGURE 1.

*NOT SUPPLIED

Line art shown may not exactly match the fixture enclosed.

However, the installation instructions do apply to this fixture.

PLASTIC

ANCHOR (N)

WIRE

CONNECTORS (I)

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1. Turn off power at circuit box to avoid possible electric shock.

2. Beginning at sides and working at an angle, peel protective coating (if applicable) from face plate (A) (see fig. 1).

3. Remove cups (B) from sockets (C) by simultaneously twisting and pulling cups (B) counter clockwise off of sockets (C). If fixture is supplied with rings (R), unscrew counter clockwise off of sockets (C).

4. Remove screws (D) and lock washers (E) (if applicable) from outer edges of face plate (A).

5. Separate decorative plate (F) (if applicable) and face plate (A) from back plate (G).

6. Push wires through back plate opening (H).

7. Identify color coding of fixtures (see fig. 2).

8. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

9. Fit wire connector (I from fig. 1) overwires and twist until there is a firm connection. If wire connector (I) easily comes off, reattach and check again for a firm connection.

10. Repeat steps 8 and 9 with the white (group B from fig. 2) fixture wires and outlet box wires.

11. Partially thread green grounding screw (J) into side hole (K) on back plate (G) (see fig. 1).

12. Wrap ground wire from fixture around green grounding screw (J) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (I), if applicable.

13. Tighten green grounding screw (J). Do not over tighten.

14. Tuckwires inside outlet box (L).

MOUNTING AND WIRING INSTRUCTIONS

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only. NOTE: For maximum support, secure back plate (G) with wood screws (M) (or plastic anchors

(N)) if outer holes (P) meet sheetrock by following steps 1 and 2 below.

1. Position flat side of back plate (G) against wall at mounting location and mark outer holes (P) with a pencil.

NOTE: Back plate (G) must be level for fixture to hang straight.

2. Drill a 1/8” hole at each mark then insert plastic anchors (N) by gently tapping with a hammer.

3. Place back plate (G) over outlet box (L) and secure using outlet box screws (Q), not included, and wood screws (M) (vertically or horizontally as desired, see fig. 1).

4. Position face plate (A) then decorative plate (F) (if applicable) over back plate (G) and sockets (C).

5. Secure by simultaneously twisting and pushing cups (B) clockwise over sockets (C) (for a tighter fit, slightly bend tabs inside cups (B) outward).

NOTE: If fixture is supplied with threaded sockets (C), thread rings (R) onto sockets (C).

6. Replace screws (D) (if applicable) and lock washers (E) (if applicable) on outer edges of face plate (A).

7. Install lamp(s). Do not exceed recommended wattage.

8. Turn power back on at circuit box.

+ 8 hidden pages