Owner’s Manual
Guide d’utilisation
Manual del Usuario
Indoor Lighting Fixture
Installation Instructions
Instructions d'installation
Appareil d'éclairage pour utilisation intérieure
Instrucciones para la insalación
de la lámpara para interiores
W-272
040706
Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE
Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
catalogroom@westinghouselighting.com.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).
WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.
This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.
This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of
the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.
WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear,
do not proceed. Contact a qualified electrician. Read all instructions
before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.
NOTE: For fixture employing a grounded convenience outlet. This fixture
employs a grounded type receptacle and is not intended for connection to
a two wire ungrounded source of supply.
Applicable only to portable lamps:
To reduce the risk of electrical shock, all portable lamps have a polarized
plug (one blade is wider than the other). This plug will fit into a polarized
outlet only one way. If plug does not fit, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully plugged into the extension cord. Do not alter the plug.
2
FIGURE 1.
*OUTLET
BOX (D)
GROUND
WIRE
MOUNTING
BAR (C)
WIRE
CONNECTORS (I)
SIDE
HOLE (K)
*OUTLET BOX
SCREWS (E)
GREEN
GROUNDING
SCREW (J)
BACK
PLATE (B)
KNOB
NUT (M)
SOCKET (Q)
LOCK WASHER 1 (H1)
HEX NUT 1 (F1)
MOUNTING NIPPLE (L)
HEX NUT 2 (F2)
LOCK WASHER 2 (H2)
HEX NUT 3 (F3)
DIFFUSER (N)
BACK
SOCKET
NIPPLE (G)
FRONT
SOCKET
NIPPLE (P)
RUBBER
WASHER (O)
CAP
NUT (A)
Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.
3
*NOT SUPPLIED
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires.
These fixtures meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Secure mounting bar (C) to outlet box (D) with outlet box screws (E) (not included) (see fig. 1).
3. Thread hex nut 1 (F1) onto mounting nipple (L) approximately 1/4 inch and insert lock
washer 1 (H1), then thread mounting nipple (L) onto mounting bar (C) and secure with hex
nut 1 (F1).
4. Thread wires from back socket nipple (G) on socket (Q) through hex nut 3 (F3) and
off-center hole in back plate (B), then through lock washer 2 (H2) and secure with
hex nut 2 (F2).
5. Identify color coding of fixture wires (see fig. 2).
6. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against
black outlet box wire. Do not twist wires.
7. Fit wire connector (I from fig. 1) over wires and twist until there is a firm connection. If
wire connector (I) easily comes off, reattach and check again for a firm connection.
8. Repeat steps 6 and 7 with the white (group B from fig. 2) fixture and outlet box wires.
9. Partially thread green grounding screw (J) into side hole (K) on mounting bar (C)
10. Wrap ground wire from fixture around green grounding screw (J), leaving enough
excess wire to then connect ground wire and outlet box wire with wire connector (I).
11. Tighten green grounding screw (J). Do not over tighten.
12. Tuckwires inside outlet box (D) (see fig. 1).
13.Position back plate (B) over mounting nipple (L) protruding through center back plate
and secure knob nut (M) onto mounting nipple (L).
(see fig.1.)
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Install lamp(s). Do not exceed recommended wattage.
2. Place rubber washer (O) and diffuser (N) over front socket nipple (P) and secure with
cap nut (A).
3. Turn power back on at circuit box.
4