Westinghouse 6621400 Instruction Manual

Owner’s Manual

Guide d’utilisation
Manual del Usuario

Indoor Lighting Fixture
Installation Instructions

Instructions d'installation
Appareil d'éclairage pour utilisation intérieure

Instrucciones para la insalación
de la lámpara para interiores

W-247

031006

Please write model number here for future reference: / Veuillez noter le numéro de mod­èle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
[e-mail].

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.

WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear,
do not proceed. Contact a qualified electrician. Read all instructions
before beginning. Proper wiring is essential for safe operation of this fix­ture. When cutting or drilling into walls or ceilings, do not damage electri­cal wiring, gas lines, or water lines. If any of the fixture or wiring compo­nents are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet. This fixture
employs a grounded type receptacle and is not intended for connection to
a two wire ungrounded source of supply.

Applicable only to portable lamps:
To reduce the risk of electrical shock, all portable lamps have a polarized
plug (one blade is wider than the other). This plug will fit into a polarized
outlet only one way. If plug does not fit, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully plugged into the extension cord. Do not alter the plug.

2

FIGURE 1.

SIDE HOLE (I)

MOUNTING BAR (A)

GREEN
GROUNDING
SCREW (H)

GROUND
WIRE

*OUTLET

BOX (B)

WIRE
CONNECTORS (G)

*OUTLET BOX

SCREWS (C)

LOCK WASHER (F)
HEX NUT (D)

MOUNTING NIPPLE (E)

CANOPY (J)

CHECK
RING (K)

KNOB (L)

Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.

3

GLASS
RETAINING
SPRING (M)

GLASS (N)

*NOT SUPPLIED

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These
fixtures meet all UL specifications.

1. Turn off power at circuit box to avoid possible electric shock.

2. Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1).

3. Thread hex nut (D) onto mounting nipple (E) approximately 1/4 inch and insert lock washer
(F), then thread mounting nipple (E) onto mounting bar (A) and secure with hex nut (D).

4. Identify color coding of fixture wires (see fig. 2).

5. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black
outlet box wire. Do not twist wires.

6. Fit wire connector (G from fig. 1) overwires and twist until there is a firm connection. If wire
connector (G) easily comes off, reattach and check again for a firm connection.

7. Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wires and outlet box wires.

8. Partially thread green grounding screw (H) into side hole (I) on mounting bar (A) (see fig. 1).

9. Wrap ground wire from fixture around green grounding screw (H) leaving enough excess wire to
then connect ground wire and outlet box wire with wire connector (G), if applicable.

10. Tighten green grounding screw (H). Do not over tighten.

11. Tuckwires inside outlet box (B).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1. Raise canopy (J) to ceiling over mounting nipple (E), place check ring (K), if applicable, on
mounting nipple (E), and secure with knob (L).

2. Install lamp(s). Do not exceed recommended wattage.

3. Bend glass retaining springs (M) together and pass neck of glass (N) over lamp, socket, and
retaining spring (M). Use caution when handling spring. Release spring slowly while holding
glass in position. Glass will sit and remain securely in place.

4. Turn power back on at circuit box.

NOTE: To remove glass (N), grasp glass firmly and carefully pull down being sure to pull to one side.

Retaining spring (M) will release. Pull glass (N) free of fixture.

4