Westinghouse 6482900 Instruction Manual

Owner’s Manual

Guide d’utilisation Manual del Usuario

Outdoor Lighting Fixture Installation Instructions

Instructions d'installation Appareil d'éclairage pour utilisation extérieure

Instrucciones para la insalación de la lámpara para exteriores

W-242

022306

Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com.

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).

FIXTURE WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture. If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price.

LAMP WARRANTY INFORMATION

The Energy-saving fluorescent light source included is warranted for a period of 10,000 hours, based on normal use from the date of original purchase, against defects in material or workmanship.

Westinghouse Replacement Lamp Information

WATTAGE Model No.

13 36307 18 36308 23 36309 27 36310

WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

FIGURE 1.

*OUTLET

BOX (C)

GROUND WIRE

WIRE CONNECTORS (E)

CROSS BAR (B)

SIDE HOLE (G)

GREEN GROUNDING SCREW (F)

*OUTLET BOX

SCREWS (D)

MOUNTING SCREWS (A)

CAP NUTS (I)

PHOTOCELL (J)

BACK PLATE (H)

SOCKET BASE (L)

LAMP (K)

NOTE: Lamp and Ballast are replaceable without cutting any wires.

Turn power off first to avoid "risk of shock".

Simple twist & lock replacement.

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.

*NOT SUPPLIED

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1. Turn off power at fuse box to avoid possible electric shock.

2. Thread mounting screws (A) into cross bar (B) with mounting screws protruding away from outlet box (C) (see figure 1).

3. Secure cross bar (B) to outlet box (C) with outlet box screws (D) (not included).

4. Identify color coding of fixture wires (see figure 2 on page 11).

5. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6. Fit wire connector (E from fig. 1) over wires and twist until there is a firm connection. If wire connector (E) easily comes off, reattach and check again for a firm connection.

7. Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wires and outlet box wires.

8. Partially thread green grounding screw (F) into side hole (G) on

9. Wrap ground wire from fixture around green grounding screw (F), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (E)

10. Tighten green grounding screw (F). Do not over tighten.

11. Tuck wires inside outlet box (C) (see fig. 1).

cross bar (B

) (see fig. 1).

FIXTURE ASSEMBLY INSTRUCTIONS

1. Tuckwires inside outlet box (C) (see figure 1).

2. Place back plate (H) over mounting screws (A).

3. Secure into place with cap nuts (I).

4. Install included lamp (K) by inserting into socket base (L) and twisting to lock.

5. Turn on power at circuit breaker.

Fixture includes photocell which turns on at dusk and off at dawn, and cannot be disabled.

+ 8 hidden pages