Westinghouse 6468300, 6786400, 6786300 Instruction Manual

Owner’s Manual
Outdoor Lighting Fixture Installation Instructions
W-033
1/16/04
Please write model number here for future reference: / Veuillez noter le numéro de mod­èle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:
ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE
Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).
WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.
This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement.
This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price.
WARNINGS
ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.
NOTE: For fixture employing a grounded convenience outlet. CAUTION: “This fixture employs a grounded type receptacle and is
not intended for connection to a two wire ungrounded source of supply.”
FIGURE 1.
FINIAL (P)
RUBBER RING (R)
ROOF (N)
NIPPLE (O)
CAP NUTS (J)
FIXTURE COVER BRACKET (L)
*OUTLET
BOX (D)
GROUND WIRE
CROSS BAR (C)
WIRE CONNECTORS (F)
SIDE HOLE (H)
BACK PLATE (B)
SCREWS (M)
CAGE (K)
*OUTLET BOX
SCREWS (E)
GREEN GROUNDING SCREW (G)
MOUNTING SCREWS (I)
TAIL FINIAL (Q)
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.
CAP NUTS (A)
*NOT SUPPLIED
MOUNTING AND WIRING INSTRUCTIONS
CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Remove cap nuts (A) from back plate (B) and remove cross bar (C) (see fig. 1).
3. Secure cross bar (C) to outlet box (D) with outlet box screws (E) (not included).
4. Identify color coding of fixture wires (see figure 2 on page 11).
5. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.
6. Fit wire connector (F from fig. 1) over wires and twist until there is a firm connection. If wire connector (F) easily comes off, reattach wire connector (F) and check again for a firm connection (see figure 1).
7. Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wire and outlet box wires.
8. Partially thread green grounding screw (G) into side hole (H) on cross bar (C) (see fig.1).
9. Wrap ground wire from fixture around green grounding screw (G), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (F) (if applicable).
10. Tighten green grounding screw (G). Do not over tighten.
11. Tuck wires inside outlet box (D).
FIXTURE ASSEMBLY INSTRUCTIONS
1. Place back plate (B) over mounting screws (I) (see fig. 1).
2. Secure into place with cap nuts (A).
3. Install lamp(s). Do not exceed recommended wattage.
4. Remove two cap nuts (J) from inside rim of fixture cage (K).
5. Install fixture cover bracket (L) over screws inside cage (K) and secure with cap nuts (J).
6. Place roof (N) over nipple (O) on fixture cover bracket (L) and secure with rubber ring (R) and finial (P).
7. Secure tail finial (Q) to bottom of fixture cage (K).
8. Turn power back on at circuit box.
Loading...
+ 8 hidden pages