Owner’s Manual
Guide d’utilisation
Manual del Usuario
Indoor Lighting Fixture
Installation Instructions
Instructions d'installation
Appareil d'éclairage pour utilisation intérieure
Instrucciones para la insalación
de la lámpara para interiores
Lamps included with this lighting fixture should not be used with any
dimming system. To reduce the risk of fire, electric shock or
personal injury, do not use with dimmers.
Les ampoules incluses avec cet appareil d’éclairage ne doivent pas
être utilisées avec un gradateur. Afin de réduire les risques
d’incendie, d’électrocution et de blessures, ne pas utiliser les
gradateurs.
Las lámparas que se incluyen con este artefacto de iluminación no
deben ser usadas con ningún sistema de conmutación de intensidad.
Para reducir el riesgo de incendios, descargas eléctricas o lesiones
personales, no las utilice con conmutadores de intensidad.
W-265
021907
Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE
Congratulations on yourWestinghouse purchase. This fixture has been designed to give you
many years of beauty and service. Please email questions and comments to:
catalogroom@westinghouselighting.com.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).
FIXTURE WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other
warranties expressed or implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.
This warranty does not cover broken glass. If fixture is received with broken glass, please call
Westinghouse Lighting for free replacement.
This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of
the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.
LAMP WARRANTY INFORMATION
The Energy-saving fluorescent light source included is warranted for a period of 10,000 hours, based
on normal use from the date of original purchase, against defects in material or workmanship.
Westinghouse Replacement Lamp Information
WATTAGE Model No.
13 36307
18 36308
23 36309
27 36310
WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear,
do not proceed. Contact a qualified electrician. Read all instructions
before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provided on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C.
Consult a qualified electrician before installing.
2
FIGURE 1.
GROUND
WIRE
*OUTLET
BOX (C)
CANOPY (H)
SIDE HOLE (G)
MOUNTING
BAR (B)
GREEN
GROUNDING
SCREW (F)
NIPPLE (K)
*OUTLET BOX
MOUNTING
SCREWS (A)
SOCKET
BASE (Q)
WIRE
CONNECTORS (E)
SCREWS (D)
KEY SLOTS (I)
LAMP (P)
NOTE:
Lamp & Ballast
are replaceable
without cutting
any wires.
Simple
twist & lock
replacement.
WASHER (L)
FINIAL (N)
Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.
3
GLASS
SHADE (J)
*NOT SUPPLIED
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These
fixtures meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Thread mounting screws (A) into mounting bar (B) (see fig. 1) approximately
3. Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (not included).
4. To connect wires, take black fixture wire (group A from fig. 2 on page 11) and place evenly
against black outlet box wire. Do not twist wires.
5. Fit wire connector (E from fig. 1) over wires and twist until there is a firm connection.
If wire connector (E) easily comes off, reattach wire connector (E) and check again for a
firm connection (see figure 1).
6. Repeat steps 4 and 5 with the white (group B from fig. 2) fixture wire and outlet box wires.
7. Partially thread green grounding screw (F) into side hole (G) on mounting bar (B)
8 Wrap ground wire from fixture around green grounding screw (F) leaving enough excess
wire to then connect ground wire and outlet box wire with wire connector (E), if applicable.
9. Tighten green grounding screw (F). Do not over tighten.
10. Tuck wires inside outlet box (C).
1
/4 inch.
(see fig.1.)
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Raise canopy (H) to ceiling allowing mounting screws (A) to protrude through key
slots (I) in canopy (H) (see fig. 1).
2. Rotate canopy (H) clockwise until mounting screws (A) lock into narrow portion of key slots (I).
3. Install lamp(s) (P) into socket base (Q).
4. Raise glass shade (J) to canopy (H) allowing nipple (K) to protrude through opening.
5. Carefully support glass shade (J) while securing washer (L) and finial (N) to nipple (K).
6. Turn power back on at circuit box.
4