Westinghouse 6400000, 6400200, 6400100, 6400300, 6400400 Instruction Manual

Owner’s Manual

Outdoor Lighting Fixture

LED
Installation Instructions

W-373

120513

Please write model number here for future reference: / Veuillez noter le numéro de modèle
aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para
futura referencia:

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many
years ofbeautyand service. For questions and comments, please visit www.westinghouselighting.
com/contact-us.

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before
discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for
a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed
or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and
discoloration of components, nor does it cover damages caused through abuse, improper
installation, surges in electric current, or acts of third parties.

This warranty does not cover costs of removing and re-installing the light fixture.
If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of

the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or
replace the fixture or refund the purchase price.

WARNING:

ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are
unclear, do not proceed. Contact a qualified electrician. Read all
instructions before beginning. Proper wiring is essential for safe
operation of this fixture. When cutting or drilling into walls or
ceilings, do not damage electrical wiring, gas lines, or water lines.
If any of the fixture or wiring components are damaged, do not
install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only.
(These warnings are provided on the U.L. label and on the fixture
carton.) Risk of fire. Most dwellings built before 1985 have supply
wires rated 60° C. Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet.
CAUTION: “This fixture employs a grounded type receptacle and is

not intended for connection to a two wire ungrounded source of
supply.”

2

FIGURE 1.

*OUTLET

BOX (C)

GROUND
WIRE

WIRE
CONNECTORS (E)

CROSS
BAR (B)

SIDE
HOLE (G)

GREEN
GROUNDING
SCREW (F)

*OUTLET BOX

SCREWS (D)

CAP NUTS (I)

MOUNTING
SCREWS (A)

BACK PLATE (H)

Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.

3

*NOT SUPPLIED

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal
between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These
fixtures meet all UL specifications.

1. Turn off power at fuse box to avoid possible electric shock.

2. Thread mounting screws (A) into cross bar (B) with mounting screws protruding away from
outlet box (C) (see figure 1).

3. Secure cross bar (B) to outlet box (C) with outlet box screws (D) (not included).

4. Identify color coding of fixture wires (see figure 2 on page 11).

5. To connect wires, take black fixture wire and place evenly against black outlet box wire.
Do not twist wires.

6. Fit wire connector (E) over wires and twist until there is a firm connection (see figure 2).

7. Repeat steps 4 and 5 with the white (group B from figure 2) fixture wire and outlet box wires.

8. Partially thread green grounding screw (F) into side hole (G) of cross bar (B) (see figure 1).

9. Wrap ground wire from fixture around green grounding screw (F) leaving enough excess wire to

then connect ground wire and outlet box wire with wire connector (E), if applicable.

10. Tighten grounding screw (F). Do not over tighten.

FIXTURE ASSEMBLY INSTRUCTIONS

1. Tuck wires inside outlet box (C) (see figure 1).

2. Place back plate (H) over mounting screws (A).

3. Secure into place with cap nuts (I).

4. Turn on power at circuit breaker.

4