Westinghouse 42204, W-076 User Manual

Owner’s Manual

Outdoor Lighting Fixture Installation Instructions

W-076

042204

Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com.

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture.

If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price.

WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet. This fixture employs a grounded type receptacle and is not intended for connection to a two wire ungrounded source of supply.

Applicable only to portable lamps: To reduce the risk of electrical shock, all portable lamps have a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If plug does not fit, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully plugged into the extension cord. Do not alter the plug.

FIGURE 1.

*NOT SUPPLIED

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.

*OUTLET BOX (C)

GREEN GROUNDING SCREW (N)

WIRE CONNECTORS (M)

GROUND WIRE

*OUTLET BOX

SCREWS (D)

MOUNTING SCREWS (A)

MOUNTING BAR (B)

SIDE HOLE (O)

CANOPY (L)

NIPPLE (F)

CAP NUTS (P)

LOCK WASHER (G)

CHAIN (J)

HEX NUT (E)

SCREWS (R)

FIXTURE CAGE (I)

CANOPY LOOP (H)

FIXTURE LOOP (K)

TOP ASSEMBLY(Q) (MAYBE PREASSEMBLED)

PENDANT MOUNT

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1. Turn off power at circuit box to avoid possible electric shock.

2. Thread mounting screws (A) into mounting bar (B) approximately 1/4 inch (see fig. 1).

3. Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (not included).

4. Thread nipple (F) into canopy loop (H), place canopy (L) over nipple (F), then secure nipple (F) with lock washer (G) and hex nut (E). May be preassembled (do not twist or kink wires).

5. Thread fixture loop (K) onto top assembly (Q) (see fig. 1).

6. Open one link on bottom end of chain (J). Attach to fixture loop (K). Securely close link on chain (J).

7. Lace wires up through every other link on chain (J) then through canopy loop (H), canopy (L) and nipple (F).

8. Open one link on top end of chain (J). Attach to canopy loop (H)

and canopy (L)

. Securely

close link on chain (J).

9. Identify color coding of fixture wires (see fig. 2 on page 18).

10. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

11. Fit wire connector (M from fig. 1) over wires and twist until there is a firm connection. If wire connector (M) easily comes off, reattach and check again for a firm connection.

12. Repeat steps 10 and 11 with the white (group B from fig. 2) fixture wires and outlet box wires.

13. Partially thread green grounding screw (N) into side hole (O) on mounting bar (B)

(see fig.1.)

14. Wrap ground wire from fixture around green grounding screw (N), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector.

15. Tighten green grounding screw (N). Do not over tighten.

16. Tuck wires inside outlet box (C).

PENDANT MOUNTING AND WIRING INSTRUCTIONS

PENDANT FIXTURE ASSEMBLY INSTRUCTIONS

1. Secure fixture loop (H) to nipple (F) by raising canopy (L) to ceiling. Allow mounting screws (A) to protrude through openings in canopy (L), and secure with cap nuts (P).

2. Install lamp (s). Do not exceed recommended wattage.

3. Turn power back on at circuit box.

FIGURE 3.