Westinghouse 0365500, 0365300, 0365200 Instruction Manual

INSTALLATION GUIDE

Please read all information before installing the lamps and keep this sheet for future reference.

• These lamps are direct replacements for 32W T8 lamps only.

• Also dimmable when used with applicable ballast

• Operates on Instant Start Electronic Ballast only.

• Risk of Fire: Do not install this lamp in a preheat luminaire.

• Risk of electronic shock - Use only in dry locations.

• Any modications to this product will void the warranty.

• This lamp may not be compatible with all ballasts, go to www.westinghouselighting.com for compatibility information.

IMPORTANT SAFETY INFORMATION:

CAUTION: If the lamp or luminaire exibits undesireable operation (buzzing, ickering etc.), immediately turn o power, remove lamp from luminaire and contact us at www.westinghouselighting.com.

Risk of re. Do not install in a pre-heat luminaire. This lamp only operates on electronic ballasts. If lamp does not light when the luminaire is energized, remove lamp from luminaire and contact us at

www.westinghouselighting.com or qualied electrician. This device is not intended for use with emergency exit xtures or emergency exit lights. Lamps must be operated within an ambient xture temperature of -22

INSTALLATION INSTRUCTIONS

STEP 1. STEP 2. STEP 3A. STEP 3B.

F and 133oF to ensure ul compliance.

Turn o the power to the luminaire before removing the lamp.

Remove the diuser, lens cover or louver (if provided).

Fluorescent lamps to be

Remove the uorescent lamp. First, rotate the lamp 90’ degrees.

Then, remove the lamp from the lampholder.

replaced with Westinghouse LED T8 lamps are shown above.

STEP 4A. STEP 4B. STEP 5. STEP 6.

Insert the Westinghouse LED replacement lamp.

Then, rotate the lamp 90’ degrees.

Make sure that the pins are completely seated in the lampholders. One LED lamp for each uorescent

Repeat steps 3 and 4 as needed for additional lamps.

Replace the diuser, lens cover or louver (if removed in step 2).

Turn the power to the luminaire back on.

lamp removed.

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com