Western Telematic IPS-400-CE User Manual
™
IPS-400 / IPS-400-CE
NETREACH
Solutions for Remote Network Management
Network Based Rack Mount Power Control
Control Power to
Any AC Powered Device
via Browser, Telnet, External
Modem or Local Terminal
Applications:
Remote Power Management
and Control
Reboot Servers, Routers,
Switches, Web Cams, Firewalls
and Other Remote Devices
Remote Power Management Switches
Servers, routers, and other electronic equipment sometimes
"lock-up," often requiring a service call to a remote site just to
flip the power switch to perform a simple reboot. The IPS-400
Internet Power Switch gives you the ability to perform this
function from anywhere; just point your browser to the IPS's
TCP/IP address, enter the secure user name and password, and
you're just a click away from remote power On, Off or Reboot!
Features:
Web Browser Access for
Easy Setup and Operation
Encrypted Password Security
On / Off / Reboot Switching
IP Addressed, 10Base-T Interface
RS232 Modem / Console Port
Network Security Features
Four Individual Switched Outlets
Rack mount hardware included
115 VAC and 230 VAC Models
Two Convenient User Interfaces
The IPS-400 provides two convenient methods for accessing
configuration and control switching functions; The Web Browser
Interface and the Command Line Interface.
The Web Browser Interface consists of a series of simple, easy-to-use
web page menus that allow you to select configuration parameters
or initiate switching operations using your TCP/IP network and a
JavaScript enabled web browser.
The Command Line Interface is an ASCII menu system, which allows
you to configure and operate the IPS via telnet over TCP/IP network,
via external modem connection or via local PC using a terminal
program such as Hyperterminal or TeraTerm.
western telematic incorporated
0507-IPS4-1
IPS-400 / IPS-400-CE Remote Power Management Switches
Specifications
Power Input/Output (IPS-400):
Voltage: 100 - 120 VAC, 50/60 Hz
AC Input: 15 Amps Maximum
AC Inlet: IEC-60320-C14
AC Outlets: Four (4) NEMA 5-15 Outlets
Current Load: 15 Amps Max. (Total)
IPS-400
IPS-400-CE
Security and Co-Location Features
Access to the IPS-400 command mode is password protected
to prevent unauthorized users from invoking sensitive switching
and configuration functions. Both the Web Browser Interface and
Command Line Interface require the user to enter a password before
allowing access. Passwords transmitted via web browser use 64-bit
encryption techniques to ensure that passwords remain protected
and access to your equipment remains secure. Telnet control can
be user-defined to a discrete TCP port, or completely turned off to
ensure that no unprotected port is present.
The IPS-400 also features two different levels of operational
passwords; the System Administrator Level and the User Level.
The Administrator Level provides access to all configuration and
switching functions, while the User Level is limited to switching
functions only. Each outlet can have a unique User Level password.
Power Input/Output (IPS-400-CE):
Voltage: 208 - 240 VAC, 50/60 Hz
AC Input: 10 Amps Maximum
AC Inlet: IEC-60320-C14
AC Outlets: Four (4) IEC60320-C13 Outlets
Current Load: 10 Amps Max. (Total)
Physical/Environmental:
Size:
Width: 19.0" (48.2 cm)
Depth: 4.25" (10.8 cm)
Height: 1.75" (4.5 cm) one rack U
Weight: 10 lbs (4.5 Kg) Shipping Weight
Operating Temperature:
(0˚C to 50˚C)
Humidity: 10% to 90% RH
Agency Approvals:
Control Ports:
Ethernet Port: 10Base-T
Console Port: DB-9M, RS-232C
RS232 Coding: Serial ASCII, 7/8 Bits,
300-38.4 Kbps.
32˚F to 122˚F
FCC
System Status Screen
western telematic incorporated
5 Sterling • Irvine • California 92618-2517
TOLL FREE (800) 854-7226
TEL (949) 586-9950
FAX (949) 583-9514
EMAIL info@wti.com
WEB www.wti.com
© Copyright 2005 Western Telematic, Incorporated
NetReach is a trademark of
Western Telematic, Incorporated
Loading...