Westermo RedFox-5528-T28G-LV, RedFox-5528-E-T28G-LVa, RedFox-5528-T28G-HV, RedFox-5528-E-T28G-HVa, RedFox-5528-F4G-T24G-LV User Manual
...
www.westermo.com
WeOS
RedFox 5528 Series
Industrial routing switches
Table of Contents
1. General Information ........................................................................ 3
1.1. Legal Information ................................................................... 3
1.2. About This Guide ................................................................... 3
1.3. Software Tools ...................................................................... 3
1.4. License and Copyright for Included FLOSS ................................. 3
1.5. WeOS Management Guide ...................................................... 3
2. Safety and Regulations ................................................................... 4
2.1. Warning Levels ..................................................................... 4
2.2. Safety Information ................................................................. 5
2.3. Care Recommendations ......................................................... 6
2.4. Maintenance ......................................................................... 7
2.5. Fibre Optics Handling ............................................................. 7
2.6. Cleaning Optical Connectors .................................................... 7
2.7. Product Disposal ................................................................... 7
2.8. Compliance Information .......................................................... 8
2.8.1. Agency Approvals and Standards Compliance .................... 8
2.8.2. FCC Part 15.105 Notice ................................................. 8
2.8.3. Corrosive Environment .................................................. 8
2.8.4. Simplified Declaration of Conformity .................................. 9
3. Product Description ...................................................................... 10
3.1. Product Description .............................................................. 10
3.2. Available Models ................................................................. 10
3.3. Hardware Overview ............................................................. 11
3.4. Connector Information .......................................................... 11
3.4.1. Power Input and I/O ..................................................... 11
3.4.2. I/O Connection ........................................................... 12
3.4.3. Console Port .............................................................. 13
3.4.4. SFP Transceivers ........................................................ 13
3.5. LED Indicators .................................................................... 14
3.6. Dimensions ........................................................................ 15
4. Installation .................................................................................. 16
4.1. Mounting ........................................................................... 16
4.1.1. Rack Mounting ........................................................... 16
4.1.2. Wall Mounting ............................................................ 16
4.2. Earth Connection ................................................................. 17
4.3. Cooling .............................................................................. 17
5. Specifications .............................................................................. 18
5.1. Interface Specifications ......................................................... 18
5.2. Type Tests and Environmental Conditions ................................. 21
6. Revision Notes ............................................................................ 24
2 RedFox 5528 Series
1. General Information
1.1. Legal Information
The contents of this document are provided “as is”. Except as required by applicable law,
no warranties of any kind are made in relation to the accuracy and reliability or contents of
this document, either expressed or implied, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. Westermo reserves the
right to revise this document or withdraw it at any time without prior notice.
Under no circumstances shall Westermo be responsible for any loss of data or income or
any special, incidental, and consequential or indirect damages howsoever caused.
More information about Westermo can be found at www.westermo.com.
1.2. About This Guide
This guide is intended for installation engineers and users of the Westermo products.
It includes information on safety and regulations, a product description, installation
instructions and technical specifications.
1.3. Software Tools
Related software tools are available at www.westermo.com/support/software-tools.
1.4. License and Copyright for Included FLOSS
This product includes software developed by third parties, including Free/Libre Open
Source Software (FLOSS). The specific license terms and copyright associated with the
software are included in each software package respectively. Please visit the product web
page for more information.
Upon request, the applicable source code will be provided. A nominal fee may be charged
to cover shipping and media. Please direct any source code request to your normal sales or
support channel.
1.5. WeOS Management Guide
This product runs WeOS (Westermo Operating System). Instructions for quick start,
configuration, factory reset and use of USB port are found in the WeOS Management
Guide at www.westermo.com.
RedFox 5528 Series 3
2. Safety and Regulations
2.1. Warning Levels
Warning signs are provided to prevent personal injuries and/or damages to the product.
The following levels are used:
Level of warning
WARNING
CAUTION
NOTICE
Description Consequence
Indicates a potentially
hazardous situation
Indicates a potentially
hazardous situation
Provides information in order
to avoid misuse of the
product, confusion or
misunderstanding
Used for highlighting general,
but important information
personal injury
Possible death or major
injury
Minor or moderate
injury
No personal injury Minor damage to the
No personal injury Minor damage to the
Consequence
material damage
Major damage to the
product
Moderate damage to the
product
product
product
NOTE
Table 1. Warning levels
4 RedFox 5528 Series
2.2. Safety Information
Before installation:
Read this manual completely and gather all information available on the product. Make sure
it is fully understood. Check that your application does not exceed the safe operating
specifications for the product.
This product should only be installed by qualified personnel.
This product should be built-in to an apparatus cabinet or similar, where access is
restricted to service personnel only.
The power supply wiring must be sufficiently fused, and if necessary, it must be possible to
disconnect it manually from all power supply. Ensure compliance to national installation
regulations.
This product relies on convection cooling. To avoid obstruction of the airflow around the
product, follow the spacing recommendations. See Cooling chapter.
WARNING - PROTECTIVE EARTHING
Before powering up, a protective earthing conductor must be connected
to the protective earthing terminal and have a cross-sectional area of at
least 4 mm2.
WARNING - PREVENT ACCESS TO HAZARDOUS VOLTAGE
Before mounting, using or removing this product: Prevent access to
hazardous voltage by disconnecting the product from all power supply.
WARNING - HAZARDOUS VOLTAGE
Do not open the connected product. Hazardous voltage may occur within
this product when connected to power supply.
RedFox 5528 Series 5
WARNING - PREVENT ACCESS TO HAZARDOUS VOLTAGE
1
2 3
CABLE
Apply the protective cap (delivered with the HV product) on the power
cable, according to the illustrated steps below. To prevent accidentally
pulling out wires, make sure the power cable and the wires are firmly
attached to the protective cap. For screw connectors, make sure the
screws are properly tightened, as well as routing the wires separately from
other wires.
CAUTION - CLASS 1 LASER PRODUCT
Do not look directly info a fibre optical port or any connected fibre,
although the product is designed to meet the Class 1 Laser regulations
and complies with 21 CFR 1040.10 and 1040.11.
CAUTION - CORROSIVE GASES
If the product is placed in a corrosive environment, it is important that all
unused connector sockets are protected with a suitable plug, in order to
avoid corrosion attacks on the gold plated connector pins.
NOTICE - REDUCE RISK OF FIRE
To reduce the risk of fire, use only No. 26 (e.g. 24 AWG) UL listed or
CSA certified Telecommunication Line Cord.
2.3. Care Recommendations
Follow the care recommendations below to maintain full operation of the product and to
fulfill the warranty obligations:
6 RedFox 5528 Series
• Do not drop, knock or shake the product. Rough handling above the specification may
cause damage to internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the product.
• Do not paint the product. Paint can clog the product and prevent proper operation.
If the product is not working properly, contact the place of purchase, nearest Westermo
distributor office or Westermo Tech support.
2.4. Maintenance
No maintenance is required, as long as the product is used as intended within the specified
conditions.
2.5. Fibre Optics Handling
Fibre optics equipment need special treatment. It is very sensitive to dust and dirt. If the
fibre will be disconnected from the product, the protective hood on the transmitter/
receiver must be connected. The protective hood must be kept on during transportation.
The fibre optics cable must also be handle the same way.
If these recommendations are not followed, the warranty might be at risk.
2.6. Cleaning Optical Connectors
In the event of contamination, the optical connectors should only be cleansed with
recommended cleaning fluids and correct cleaning equipment. Recommended cleaning
fluids:
• Methyl, ethyl, isopropyl or isobotyl alcohol
• Hexane
• Naphtha
2.7. Product Disposal
This symbol means that the product shall not be treated as unsorted municipal waste when
disposing of it. It needs to be handed over to an applicable collection point for recycling
electrical and electronic equipment.
By ensuring the product is disposed of correctly, you will help to reduce hazardous
substances and prevent potential negative consequences to both environment and human
health, which could be caused by inappropriate disposal.
Figure 1. WEEE symbol for treatment of product disposal
RedFox 5528 Series 7
2.8. Compliance Information
2.8.1. Agency Approvals and Standards Compliance
Type
EMC • EN 50121-4/IEC 62236-4, Railway signalling and telecommunications apparatus
Safety • EN/IEC/UL 60950-1, IT equipment
Approval/Compliance
• EN 61000-6-1, Immunity residential environments
• EN 61000-6-2, Immunity industrial environments
• EN 61000-6-3, Emission residential environments
• EN 61000-6-4, Emission industrial environments
Table 2. Agency approvals and standards compliance
2.8.2. FCC Part 15.105 Notice
This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This product
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television reception, which can
be determined by turning the product off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the unit and receiver
• Connect the product into an outlet on a circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV technician for help
2.8.3. Corrosive Environment
This product has been successfully tested in a corrosion test according to IEC 60068- 2-60,
method 3. This means that the product meets the requirements to be placed in an
environment classified as ISA-S71.04 class G3.
CAUTION - CORROSIVE GASES
If the product is placed in a corrosive environment, it is important that all
unused connector sockets are protected with a suitable plug, in order to
avoid corrosion attacks on the gold plated connector pins.
8 RedFox 5528 Series
2.8.4. Simplified Declaration of Conformity
Hereby, Westermo declares that this product is in compliance with applicable EU
directives. The full EU declaration of conformity and other detailed information is available
at www.westermo.com/support/product-support.
Figure 2. The European conformity marking
RedFox 5528 Series
9
Loading...