WestermannBG LS103 Service manual

TECHNICAL DATA SHEET
LS Series
Saint Ferrer® Lug Kit [LK-NIBCO] Model #LS103
Series Description
The Saint Ferrer® LS series is for the piping professional wanting ASME listed low strength components. The LS series is suitable for many ASME B31.1 Non-Boiler External Piping (NBEP) loca­tions with ASME B16.5 flanges and most AWWA applications.
Model Features
Prepackaged Bolting Kit of carbon steel low strength listed bolting intended for the assembly of two ASME B16.5 Class 150 flanges to a lug style butterfly valve. See respective AWWA C110, C115, C153, and C207 standards for suitability.
Kit includes:
• ASME listed bolting
• Plain Coating
• Heavy Hexagon Machine Bolt
• Bolt maximum tensile strength controls over-torque
• Grade and identification markings on bolt for traceability
• P.L. 106-34, Fastener Quality Act Amendments Act of 1999, compliant
ASTM Designation
Grade Markings
Coating
Yield (min) ksi
Tensile (min) ksi
Tensile (max) ksi
Proof Load (min) ksi
Thread Pitch
Dimensions
Materials
Heavy Hex Bolt
A307 Gr. B
307B
Plain
Not Defined
60
100
**
UNC-2A
ASME B18.2.1
Carbon Steel
Disclaimer of Accuracy or Quality: WestermannBG makes no warranty, express or implied, and does not assume any legal liability or responsibility for the accuracy or completeness of any information contained on, or derived from this sheet. This information is for the purpose of supporting selection and should be interpreted only by a licensed professional engineer with piping design experience.
© 2017 WestermannBG. All rights reserved
Loading...