West Elm Upholstered slipper Chair Assembly Instruction

slipper chair

assembly instructions

! Tools supplied:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.

Hardware

AB

bolts 8mm x 50mm 8x lock washer 8x

C

fl at washer 8x

Page 1 of 29330994/9330986 - 01.06.09

slipper chair

assembly instructions

1. Align the front legs as shown insert bolt(A), lock washer (C), and  at washer (B). Tighten with suppled
hex key. Align back legs as shown and insert bolt (A), lock washer (C), and  at washer (B). Tighten
with supplied hex key. DO NOT OVERTIGHTEN!

Back Legs

Back Legs

A

C

B

Front Legs

B

C

A

CARE INSTRUCTIONS

Upholstered Seat: Spot clean only. Vacuum or brush with a soft brush regularly, at least once a month. For spills, immediately dab
with a towel dampened with club soda or distilled water. Do not use household cleaners on this product.

Legs: Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.

Page 2 of 29330994/9330986 - 01.06.09