
: umbrella base round
assembly instructions
* Umbrella sold separately.
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
6759724 - 03/05
page 1 of 3

: umbrella base round
assembly instructions
1. Place metal washer around base of tube. Insert both tube and washer into the hole of base.
2. Turn clockwise until fully tightened.
6759724 - 03/05
page 2 of 3

: umbrella base round
assembly instructions
3. Insert umbrella (sold separately) into opening at top of tube. Three plastic adapters are inset into the top of the stand
tube. Use as is for umbrellas with thin poles, or take out adapters as needed for different umbrella pole sizes.
1x
4. Secure umbrella by turning the tightening key until umbrella pole stands securely upright.
CARE INSTRUCTIONS.
Wipe with a dry or slightly damp cloth and dry thoroughly. To
protect the finish, avoid the use of chemicals and household
cleaners.
Store in a dry covered area when not in use.
6759724 - 03/05
page 3 of 3