West Elm Tillary Outdoor Lounge Chair Assembly Instruction

tillary lounge chair

assembly instructions

! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
! Proper assembly of this item requires 2 people.

Parts

AB

bolt m6 x 60mm x8

C

bolt M6x50mm x8

x1

Page 1 of 312/31/09

tillary lounge chair

assembly instructions

1. Insert front rail, back rail, top and bottom seat slat into the right seat frame. Insert bolt (A) into holes
shown in drawing. Tighten with supplied hex key (C).

2. insert the 5 center slats into the right seat frame.

3. Align left seat frame and insert all rails. Insert bolt (A) thru left seat frame and tighten with supplied hex
key (C).

top slat

front rail

bottom slat

A

C

back rail

Page 2 of 312/31/09

tillary lounge chair

assembly instructions

4. Lay seat into assembled chair frame. Insert bolts (B) thru the seat into the frame and tighten with hex key
(C).

seat

C

B

CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.

Page 3 of 312/31/09