
terra platform bedframe- twin
! Tools supplied:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
! Proper assembly of this item requires 2 people.
Hardware
assembly instructions
C
m6 x 45mm bolts 8x
headboard 1x
flat washer 8x
footboard 1x
BA
lock washer 8x
side Rails 2x
Page 1 of 21576537 9-23-09

terra platform bedframe- twin
assembly instructions
1. Assemble all parts upside down on a clean, smooth surface. Slide wood slats in between rails with
strap facing down. Align and insert the tenon on the end of the side rails into the cuttouts in the side of
the headboard and footboard like the drawing shows. Insert bolt (A), lock washer (B), and at washer (C)
thru the holes shown in the drawing. Tighten with supplied hex key. Do Not Overtighten!
With help turn assembled bedframe over.
A
B
C
Stop block
Note: When installing slats make sure that the last slat is
outside of the stop block like the picture shows.
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 2 of 21576537 9-23-09