teak bath stationary caddy
assembly instructions
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.
A B
pole 2x
C D
upper rack 2x
E F
bolt: ¼” dia by 1 3/8” 2x
handle 1x
lower rack 1x
allen key 1x
G H
cam bolt 2x
cam lock 2x
Page 1 of 35571823 – 02/08
teak bath stationary caddy
1. Insert cam bolt (G) into pole as shown and tighten using phillips screwdriver.
assembly instructions
G
2. Insert handle (B), upper racks (C), and lower rack (D) into posts as shown.
A
Page 2 of 35571823 – 02/08
teak bath stationary caddy
assembly instructions
3. Insert cam lock (H) into the hole under the handle as shown. The arrow on the cam lock should point towards the pole.
Tighten the cam lock with a phillips screwdriver.
4. Insert the bolt (E) into the hole in lower rack as shown and tighten using the allen key (F).
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 3 of 35571823 – 02/08
Loading...