: t chair
assembly instructions
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect the nish.
! Follow the assembly instructions for each of the two chairs provided.
A B
plastic spacer 4x
C D
lock washer 4x allen key 1x
9160227/9160292/9159716/9160250 - 03/07
bolt: 1/4" dia x 1/2" 4x
page 1 of 4
1. Slide spacers (A) on frame close to the metal plate.
: t chair
assembly instructions
9160227/9160292/9159716/9160250 - 03/07
page 2 of 4
: t chair
assembly instructions
2. Match front of base (marked with arrow
sticker on the metal plate) with front of
seat (marked with arrow sticker on under side of seat).
3. Attach lock washer (C) with bolt (B).
Secure with allen key (D). Do not tighten
fully.
4. Adjust seat so that it is aligned with the
base. Do not over tighten or bolt heads
D
B
C
could strip.
5. Move the spacers (A) towards the outside
of the frame until they stop underneath
the seat.
9160227/9160292/9159716/9160250 - 03/07
page 3 of 4
6. Sit on the chair and re-tighten all bolts.
: t chair
assembly instructions
CARE INSTRUCTIONS:
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect the nish, avoid the use of all chemicals and household cleaners.
9160227/9160292/9159716/9160250 - 03/07
page 4 of 4
Loading...