West Elm Tapered Leg Side Table Assembly Instruction

w e s t e l m

tapered leg side table

assembly instructions

A

18 mm Dia Flat Washer 8x

C D E

Corner Bracket 4x

8342388 / 8342396 / 8342404

B

Wrench 1x

14 mm Dia Lock Washer 8x

Nut 8x

page 1 of 2

w e s t e l m

1. Place the table upside down on clean carpet or scratch-free work surface and attach one leg into the corner of the table by
inserting the exposed thread into the holes as shown.

2. Insert flat washer (A), lock washer (B) and nut (E) into the exposed bolt of the leg. Tighten the nut (do not over tighten) as
shown in illustration 1.

3. Attach the shelf into the cutout of the leg. Then insert metal bracket (C), flat washer (A), lock washer (B), and nut (E) into
the hanger bolt of the leg. Tighten the nut (do not over tighten) as shown in illustration 2.

4. Attach another leg on the opposite side diagonally to the first leg. Repeat step 3 and 4 for all other legs.

5. Fully tighten all bolts. Firmly grasp the table by both ends and return the table to its upright position.

tapered leg side table

assembly instructions

b

Illustration 2

D

Illustration 1

A

E

B

a

g

Illustration 1

E

Illustration 2

A

B

E

C

8342388 / 8342396 / 8342404

page 2 of 2