sydney single lounger
assembly instructions
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.
! Proper assembly of this item requires 2 people.
AB
bolt and plastic ring 12x
allen key 1x
CD
wheel bolt 2x wheel 2x
Page 1 of 35123120 - 09/07
sydney single lounger
assembly instructions
1. Set legs into table frame as shown.
2. Fasten legs to frame using bolts (A) as shown. Put all 12 bolts in loosely before tightening with allen key (B).
A
B
Page 2 of 35123120 - 09/07
sydney single lounger
3. Fasten wheels (D) to frame using wheel bolts (C) as shown. Tighten wheel bolts using allen key (B).
D
C
B
assembly instructions
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Teak Ca r e :
Teak is naturally resistant to the elements and can be left outside untouched and untreated for many years. Over time, the original
color will weather and soften to a silver-grey patina.
To remove the silver-grey appearance and natural day-to-day dirt, wash with warm soapy water using a sti scrubbing brush. Follow this by using a ne sandpaper to smooth any raised grain.
Page 3 of 35123120 - 09/07
Loading...