West Elm Square Column Floor Lamp Assembly Instruction
Square Column Floor Lamp
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not t securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling xture.
·This xture has been rated for up to (1) 3-way 150-watt maximum TYPE A standard bulb (not included). To
avoid the risk of re, do not exceed the recommended wattage.
Warning:
·To reduce the risk of re, electrical shock or personal injury, always turn o
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when xture is turned on. Do not look directly at lit bulb.
·Keep ammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small
parts or hardware.
Parts enclosed:
(1) Finial (A)
(1) Shade (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
Assembly Instructions:
1. Attached the threaded pole (I) onto the jointed nut (M), and secure by
turning the threaded pole clockwise.
2. Slide the lower column (H), over the threaded pole .
3. Insert the threaded pole into the center hole in the base (J) . Make sure to
align the edges of lower column, upper column (G) and base.
4. Slide the washer (K) over the threaded pole. Then attach the buttery nut
(L) to the end of threaded pole, and secure by turning the buttery nut
clockwise.
5. Insert the harp (C) into the saddle (F), and lower the two harp caps (D) until
they cover the two-pronged saddle.
6. Unscrew the nial (A) from the harp. Place the shade over the assembled
harp.
7. Attach the nial and tighten to secure the shade.
8. Insert a bulb – Max 3-way 150 Watt (Type A) Standard (not included) into
the socket (E).
9. Plug into the proper electrical outlet and test xture.
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
(1) Upper Column (G)
(1) Lower Column (H)
(1) Threaded Pole (I)
(1) Base (J)
(1) Washer (K)
(1) Buttery Nut (L)
(1) Jointed Nut (M)
assembly instructions
A
B
C
D
F
M
J
L
E
G
H
K
I
5781448/5592621/5592589/5781455/5592639/5592597- 02/08
page 1 of 1
Loading...