rustic slim console
assembly instructions
! Tool required:
! D o n o t t h r o w a w a y p a c k a g i n g m a t e r i a l u n t i l a s s e m b l y i s c o m p l e t e .
! A s s e m b l e t h i s i t e m o n a s o f t s u r f a c e , s u c h a s c a r d b o a r d o r c a r p e t , t o p r o t e c t f i n i s h .
! P r o p e r a s s e m b l y o f t h i s i t e m r e q u i r e s 2 p e o p l e .
Hardware
A
bolt 5/16” dia. X 1 3/4" 4x
C
flat washer 4x
E
B
csk bolt 1/4” dia. X 1” 4x
D
large allen key 1x
1348176-06.25.09
small allen key 1x
Page 1 of 3
rustic slim console
assembly instructions
Parts
top assembly x1 shelf assembly x1
left leg assembly x1 right leg assembly x1
1. Put left and right leg assemblies up side down on a soft at surface. Attach shelf assembly
to the leg assemblies with the csk bolts (B) as shown below. Tighten with small allen key (E).
B
1348176-06.25.09
Page 2 of 3
rustic slim console
assembly instructions
3. Place the top assembly up side down on a soft at surface. Take the completed assembly from
step 1 and attach it to the top assembly as shown below attaching it with bolts (A) and at washers
(C). Tighten with large allen key (D).
A,C
4. Once completed rotate to its upright position.
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
1348176-06.25.09
Page 3 of 3
Loading...