West Elm Round Hammered Copper Mirror Assembly Instruction

hammered copper mirror
phillips screwdriver
! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish. ! Proper assembly of this item requires 2 people.
mounting instructions
Parts:
AB
Drywall Anchor 1x
EVA Pad 2x
Long Screw 1x
Page 1 of 25568340 - 02/08/08
1. Find the desired location on wall. Using a pencil, mark the locations on the wall. This is where the hardware will be inserted.
2. Using a Philip’s head screwdriver, insert the drywall anchor (A) into the wall at the insertion point. Press and turn clockwise until anchor is  ush with the wall.
3. Insert screw (B) into the anchor or at the insertion points, leaving approximately 1/2” between the back of the screw head and the wall.
hammered copper mirror
mounting instructions
4. Align “D” ring on back of mirror over the screw head.
5. Slide the mirror down until it rests on the screws. Tighten or loosen screws as needed to  t the shelf snugly against the wall.
C
A
B
CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
Page 2 of 25568340 - 02/08/08
Loading...