West Elm Rolling Storage Unit - 4x1 Assembly Instruction

! CAUTION

The top shelf of this cart/stand is intended for use with:
Plasma/HD televisions having a maximum screen size
of 37 inches and weight of 90 lbs; or Tube televisions
having a maximum screen size of 27 inches and weight
of 95 lbs.

All other support shelves should not be loaded more
than 25 lbs.

DO NOT EXCEED RECOMMENDED LOAD. Use with
products heavier than the maximum sizes and weights
indicated may result in instability causing
possible injury.

This unit contains contains a permanent sticker located
either beneath top shelf or inside drawer.

Do not allow children under 16 years to move cart.

: rolling storage unit — 4x1

assembly instructions

! Tools required:
! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the nish.

A B

metal washer 6x lock washer 6x

D

allen key 1x

F

screw: 1/4”DIA X 1 3/4” 5x

C

bolt: 5/16"DIA x 5” 6x

E

permanent snap-lock 5x

G

screw: 5/16”DIA x 1”

20x

6886857/6886931/6886949/9741232 - 06/07

page 1 of 7

: rolling storage unit — 4x1

assembly instructions

1. Arrange verticle side panels with the raised notch towards center as shown. Attach verticle panels to bottom panel by
inserting metal washer (A) and lock washer (B) with bolt (C). Insert into pre-drilled hole as shown. Tighten with allen key
(D).

6x

A

B

C

D

6886857/6886931/6886949/9741232 - 06/07

page 2 of 7

: rolling storage unit — 4x1

assembly instructions

2. (OPTIONAL) Attach the ve casters to the bottom panel with screws (G). Tighten with a Phillips head screwdriver.

G

6886857/6886931/6886949/9741232 - 06/07

NOTE
The middle castor is the one that does

not lock.

5x

page 3 of 7