
rolling storage 3x1
assembly instructions
! Tools Required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as: cardboard or carpet to protect fi nish.
! Proper assembly of this item requires 2 people.
Parts
A
bolt 5/16” dia. x 3” 8x
B
metal washer 8x
C
D
E
F
allen key 1x
snap-lock 6x
???????-08.04.09
lock washer 8x
screw 5/16” dia. x 1” 4x
Page 1 of 3

rolling storage 3x1
assembly instructions
1. Attach the bottom panel to the side panels and the partitions with bolts (A), metal washers (b), and lock
washers (C). Tighten with allen key (D).
side panel
bottom panel
partitions
side panel
2. Attach the casters to the bottom panel with screws (F). Tighten with a phillips head screwdriver.
???????-08.04.09
with lock
without lock
Page 2 of 3

rolling storage 3x1
assembly instructions
3. Rotate the storage unit to its upright position. Using a phillips head screwdriver, screw snap-locks(E) into
the holes on the top of the side panels. Align the holes on the top panel with the snap-locks on the top of
the side panels. Firmly press down until top panel snaps into place.
top panel
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
???????-08.04.09
Page 3 of 3