West Elm Rectangular Hanging Capiz Floor Lamp Assembly Instruction

rectangular hanging capiz oor lamp

Important Safety Instructions:

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not t securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.

·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling xture.

·This xture has been rated for up to (1) 100-watt maximum type A bulb (not included). To avoid the risk of
re, do not exceed the recommended wattage.

Warning:

·To reduce the risk of re, electrical shock or personal injury, always turn o
and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when xture is turned on. Do not look directly at lit bulb.

·Keep ammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small
parts or hardware.

Parts enclosed:

•(1) Finial (H)

•(1) Harp (F)

•(1) Socket (I)

•(1) Saddle (E)

•(1) Wire Base (A)

•(1) Pole (B)

•(1) Pole (C)

•(1) Pole (D)

•(1) Shade (G)

Assembly Instructions:

1. Press the sides of harp (F) together and slide into slots into
saddle (E).

2. Take down the harp caps onto the saddle (E).

3. Screw the saddle (E) onto the pole (D).

4. Screw the pole (D) onto the pole (C).

5. Screw the pole (C) onto the pole (B).

6. Pull the wire from base (A) and screw the pole (B) onto the
base (A).

7. Put the lamp shade (G) on the harp (F).

8. Screw the nial (H) onto the harp (F).

9. Insert one 100-watt maximum type A bulb (not included) into
the socket.

10. Plug into the proper electrical outlet and test xture.

assembly instructions

H

G

F

E

D

I

C

B

A

Care instructions:

·Clean with soft, dry cloth.

·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.

5781422 - 03/08

page 1 of 1