parsons drawer unit
assembly instructions
! Tools supplied:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.
Hardware
A
bolts 6mm x 30mm 4x
C
lock washer 4x
B
Mounting Plate 2x
fl at washer 4x
Anti tip kit 1x
Nylon Strap 1x
Small Screw 2x Large Screw 2x
Page 1 of 39285289 - 01/02/09
parsons drawer unit
assembly instructions
1. Align legs with bottom . Insert bolt (A), lock washer (C), and at washer (B). Tighten with supplied
hex key. Do not overtighten.
Page 2 of 39285289 - 01/02/09
parsons drawer unit
assembly instructions
NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching unit to wall with anti-tip kits.
1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximatly 1” below the top on the back of the unit.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the unit top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten tower snug against wall.
Long Screw
Short Screw
Adjustable levelers are installed in the legs to
accommodate uneven ooring. To adjust these levelers,
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
simply turn them counterclosckwise to raise the leg.
Page 3 of 39285289 - 01/02/09
Loading...