West Elm Narrow Leg End Table Assembly Instruction

narrow leg end table
table de nuit à pieds étroits
instrucciones de montaje
Instrucciones de Ensamblaje
! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
! outils nécessaires: ! Ne jetez pas le matériel d’emballage avant d’avoir terminé le montage. ! Montez cet article sur une surface lisse, telle que du carton ou un tapis, pour en protéger la finition ! Deux personnes sont nécessaires pour monter cet article de façon adéquate.
assembly instructions
! Herramientas necesarias: ! No deseche los materiales de embalaje hasta terminar de armar el producto. ! Ensamble el producto sobre una superficie suave, como cartón o alfombra, para proteger su acabado. ! Se requieren 2 personas para armar adecuadamente el producto.
Parts
AB
8x
C
M8 8x
Page 1 of 39947953/9947938/9947961/9947946 07.01.10
narrow leg end table
table de nuit à pieds étroits
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
1. Flip end table upside down onto a clean smooth surface such as cardboard or carpet. Align legs to base as shown in drawing. Insert  at washer (A), lock washer (B), and nut (C). Tighten with supplied wrench. Flip upright.
A
B
C
Page 2 of 39947953/9947938/9947961/9947946 07.01.10
narrow leg end table
table de nuit à pieds étroits
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
2. Pull top drawer out and using a phillips head screwdriver unscrew the drawer hardware.
2. Ouvrez le tiroir et dévissez la poignée à l’aide d’un tournevis à pointe cruciforme.
3. Flip the hardware around to the front of the drawer, insert the screws from the back of the drawer front and tighten with the phillips head screwdriver.
3. Positionnez la poignée du côté extérieur du tiroir et  xez-la de nouveau. Serrez les vis à l’aide d’un tourn evis à pointe cruciforme.
STEP 2
STEP
3
CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners. les pieces de  xation peuvent se desserrer apres un certain temps. Veri ez de temps a autre pour vous assurer que tous les raccords sont serrés. Essuyez avec un chi on doux et sec. Pour eviter d’endommager la  nition, n’utilisez pas de produits chimiques ni de nettoyants ménagers. Los herrajes se peuden a ojar con el tiempo. Revise periodicamente qur todas las conexiones estén bien apretadas. Use un trapo suave y seco para limpiar. Para proteger el acabado, no utilice limpiadores domésticos ni productos químicos.
Page 3 of 39947953/9947938/9947961/9947946 07.01.10
Loading...