West Elm Monroe Chair Assembly Instruction

monroe chair

assembly instructions

! Tools supplied:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.

Hardware

AB

bolt M8 x 55 x8 bolt M8 x 90 x1

C

spring washer x9

D

fl at washer x9

Page 1 of 46231575/7162092 - 06/23/08

monroe chair

assembly instructions

1. Flip the seat frame over onto a clean table top. Insert the front legs into the bottom of the seat frame.

2. Align holes and insert bolt (A), spring washer (C),  at washer (D). Do not tighten completely.

A

C

D

Page 2 of 46231575/7162092 - 06/23/08

monroe chair

assembly instructions

3. Align back of chair with the seat frame, insert bolt (B), spring washer (C),  at washer (D) in center hole.
Insert bolt (A), spring washer (C), and  at washer (D) into other 4 holes. Do not tighten completely.

D

C

A

D

C

B

Page 3 of 46231575/7162092 - 06/23/08

monroe chair

assembly instructions

4. Flip chair upright and sit in it to be sure legs are seated properly. Flip chair back over and fully tighten all
bolts.

CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
Upholstery: Spot clean only.

Page 4 of 46231575/7162092 - 06/23/08