West Elm Modular Tall Table Top Assembly Instruction

modular tall table top

assembly instructions

! Tool required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet to protect finish.
! Proper assembly of this item requires 2 people.

Hardware

BA

metal bracket 2x

screw 12x

Parts

Base unit sold seperately

9186792-03.26.09

Page 1 of 2

modular tall table top

assembly instructions

1. Lay top upside down on a soft surface to protect nish. Attach metal bracket (A) to table top
by aligning predrilled holes on metal bracket to pre-drilled holes in under top frame. Run 3 screws
(B) to hold each bracket to under top frame.

A

2. Position 2 tall bookcases to make sure the distance between them match the distance between
the 2 assembled metal brackets under top. Carefully ip the top right side up with a helper. Then lift
on 2 bookcases as shown below. Run 3 screws (B) on each bracket through pre-drilled holes in
brackets with Philips head screw driver to hold metal brackets to bookcase.

B

B

B

A

CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.

9186792-03.26.09

Page 2 of 2