modular rectangle table top
assembly instructions
Option 1: 1 modular rectangle table top + 2 modular wide bookcase
Option 2: 1 modular rectangle table top + 1 modular wide bookcase + 1 modular 3 drawer unit
Option 3: 1 modular rectangle table top + 2 modular 3 drawer unit
! Tool required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet to protect finish.
! Proper assembly of this item requires 2 people.
Hardware
8600751-3.26.09
metal bracket 2x
BA
screw 12x
Page 1 of 4
modular rectangle table top
assembly instructions
Parts
Bookcase and 3-drawer unit sold separately
With Option1:
1. Lay top upside down on a soft surface to protect nish. Attach metal bracket (A) to table
top by aligning pre-drilled holes on metal bracket with pre-drilled holes in under top frame
as shown below. Run three screws (B) to hold each bracket to under top frames with a Philips
head screw driver.
A
8600751-3.26.09
A
Page 2 of 4
modular rectangle table top
assembly instructions
2. Position two wide bookcases to make sure the distance between them match the distance
between the two assembled metal brackets under the top. Carefully ip the top right side up
with a helper and position the top on the two bookcases as shown below. Run three screws (B)
on each bracket through the pre-drilled holes with a Philips head screw driver to attach the top
to the bookcases.
B
B
B
A
With Option 2:
1. Lay top upside down on a soft surface to protect nish. Attach the metal bracket (A) to the
table top by aligning the pre-drilled holes on the metal bracket with the pre-drilled holes on
the under top frame as shown below. Run three screws (B) to hold the bracket to the under top
frame with a Philips head screw driver.
A
2. Position the wide bookcase and the three drawer unit to make sure the distance between them
matches the distance between the assembled metal bracket and wooden frame under the top.
Carefully ip the top right side up with a helper and lift the bookcase and the three drawer unit
as shown below. Make sure the under top frame sits properly in the opening of the top of the three
drawer unit. Run three screws (B) through the pre-drilled holes in the metal bracket with a Philips
head screw driver to hold the top to the bookcase.
8600751-3.26.09
Page 3 of 4
modular rectangle table top
assembly instructions
With Option 3:
Position the two three drawer units so that the distances between them match the distance
between the two under top frames on the bottom of the modular rectangular table top.
Carefully lift the top with a helper and put the top on the two three drawer units as shown
below. Make sure each under top frame sits properly in the opening of the three drawer unit top
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
8600751-3.26.09
Page 4 of 4
Loading...