modular coffee table
assembly instructions
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.
Hardware
AB
6mm bolt 24x spring washer 16x
C
fl at washer 24x
E
D
adjustable levelers 8x
F
#8 x 16mm wood screw 12x
#8 x 25mm wood screw 12x
Page 1 of 3 7859614 - 09.04.08
modular coffee table
assembly instructions
1. First slide the table rails over the tabs on the table side frames. Insert bolt (A), spring washer (B),
and at washer (C) into holes shown in drawing. Insert only bolt (A) and at washer (C) into bottom
holes as shown. Do not tighten bolts yet. NOTE: leave the outer most holes on the bottom open.
A
A
Leave outside holes open
C
B
C
2. Insert adjustable levelers (D) into the holes left open in step 1. These levelers can be adjusted after the
table is ipped over to conform to uneven ooring.
D
Page 2 of 3 7859614 - 09.04.08
modular coffee table
assembly instructions
3. Once the frame is assembled attach the wood top using wood screw (E) thru the side frames into
the bottom of the wood top.
E
NOTE:
Thick wood top is for
large table, thin top is
for small table
4. Attach the wood top using wood screw (F) thru the end rails into the bottom of the wood top. Once
the wood top is attached tighten all bolts using the supplied allen key.
F
5. Repeat steps 1 thru 5 for the small co ee table. Once both are assembled slide the small table under the
large table.
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 3 of 3 7859614 - 09.04.08
Loading...