leather slipper chair
assembly instructions
! Tools suggested:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect the nish.
A
wood screw 4x
C
lock washer 8x metal washer 8x
B
D
E
allen key 1x
bolt 4x
7923998/8749541 - 03/06
page 1 of 3
leather slipper chair
assembly instructions
1. Insert dowels on ends of cross-bars into holes on legs as shown — make sure to position the shorter of the two cross bars
to the back. To secure, insert bolt (B) with lock washer (C) and metal washer (D) as shown. Tighten with allen key (E).
D
C
B
E
short
7923998/8749541 - 03/06
long
page 2 of 3
leather slipper chair
assembly instructions
2. Align legs to the four markings as shown. Insert short screws (A) through the holes in the cross-bars and into the base of
the seat as shown. Tighten with screwdriver.
A
CARE INSTRUCTIONS.
Leather seat: Vacuum crevices regularly to remove dirt and dust. Natural oils from hands and body should leather
conditioned. For spills, wipe any excess liquid up immediately with a clean absorbent cloth or sponge. If necessary, wipe
spill with a cloth moistened with clean distilled water. Let dry naturally.
Legs: Wipe with a soft, dry cloth. To protect the nish, avoid the use of all chemicals and household cleaners.
7923998/8749541 - 03/06
page 3 of 3
Loading...