West Elm Leather Armless Sectional Sofa Assembly Instruction

leather armless sectional sofa

assembly instructions

! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.

Hardware

AB

bolts M8 x 40mm 4x fl at washer M8 4x

C

screws 3.5 x 35mm 16x

Page 1 of 28775959 - 01.06.09

leather armless sectional sofa

assembly instructions

1. Align the legs with the corners as shown, including the back corner. Insert bolt (A) and washer (B) through
leg and into base. Tighten with supplied allen key. Insert 4 screws (C) through legs into base and tighten
with phillips head screwdriver. DO NOT OVERTIGHTEN!

B

C

CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.

Leather seat: vacuum crevices regularly to remove dirt and dust. Natural oils from hands and body
should keep leather conditioned. Use a high grade leather conditioner when needed. For spills wipe
any excess liquid up immediately with a clean, absorbant cloth or sponge. If necessary, wipe spill
with cloth or sponge. If necessary, wipe spill with cloth moistened in clean distilled water. Let dry
naturally.

Legs: Wipe with a soft dry cloth. To protect the  nish, avoid the use of all chemicals and household
cleaners

A

Page 2 of 28775959 - 01.06.09