West Elm Hudson 6 Drawer Dresser Assembly Instruction

hudson 6 drawer dresser

assembly instructions

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

A

short bolt 6x screw 8x

C

long bolt 2x

B

D

allen key 1x

Page 1 of 38407355/ 8407322/ 8687170 - 08/06

hudson 6 drawer dresser

assembly instructions

1. Before starting assembly, take out all accessories inside large bottom drawer. Then place the chest upside down on a smooth,
scratch-free surface.

2. Attached each metal leg by aligning it on the pre-drilled holes underneath the chest . Insert bolts (A) into the leg beam as
shown and tighten using the allen key (D). Then insert screws (B) into the plate and tighten using a phillips head screwdriver.

3. Attach center leg by aligning it on the pre-drilled holes at the center rail underneath the chest as shown. Then insert bolts (C)
into two holes that go through on the center leg and tighten using the allen key (D).

C

CARE INSTRUCTIONS

Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.

Page 2 of 38407355/ 8407322/ 8687170 - 08/06