West Elm Glass Link Chandelier Assembly Instruction
glass link chandelier
assembly instructions
Important Safety Instructions:
·These instructions are provided for your safety. It is important that they are read carefully and completely before
assembling xture.
•We strongly recommend that a professional electrician install all direct wire fixtures.
·This xture has been rated for up to (3) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk
of re, do not exceed the recommended wattage.
Warning:
·To reduce the risk of re, electrical shock or personal injury, always turn o lamp and allow it to cool prior to
replacing light bulb.
·Do not touch bulb when xture is turned on. Do not look directly at lit bulb.
·Keep ammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
·For your safety and convenience, assembly by two people is recommended
Parts Enclosed:
• (1) Mounting plate (D)
• (1) Canopy (E)
• (2) Metal connector (G)
• (2) Pole (H)
• (2) Hook (J)
• (2) Metal ring (K)
• (2) Metal frame (L,M)
• (208) Glass links (N) , including (6) extra
• (3) Socket (O)
• (4) Metal nut(P)
• (4) Steel Wire (R)
A
G
F F
H
D
B
C
E
R
Hardware Included:
• (3) Plastic wire connectors (A)
• (1) Green ground screw (B)
• (2) Mounting screws (C)
• (2) Canopy screws (F)
To install you will need:
• Electrical tape
• Screwdriver
Assembly Instructions:
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE
MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all xture parts and hardware and
lay out on a clear workspace.
3. Screw the pole (H) into the metal connector (G).
4. Screw the pole (I) into the pole (H).
5. Hang the hook (J) onto the pole (I) and tighten the
screw on the hook.
1748060
J
O
K
M
L
N
page 1 of 2
glass link chandelier
assembly instructions
6. Carefully inspect the xture wires. The NEUTRAL FIXTURE WIRE is white or marked “N”. The HOT FIXTURE
WIRE is black or marked “L”. The yellow-green or bare wire is the GROUND WIRE.
7. Attach the GROUND WIRE from the xture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND
WIRE, be sure to insert the green ground screw (B) into the mounting plate (D) facing DOWN, and wrap the
xture's bare ground wire around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR
HOME BE PROPERLY GROUNDED.
8. Connect the NEUTRAL FIXTURE WIRE to the NEUTRAL JUNCTION BOX WIRE (white). Fasten each together
with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire strands are
exposed.
9. Connect the HOT FIXTURE WIRE to the HOT JUNCTION BOX WIRE (black). Fasten each together with a
plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire strands are
exposed. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
10. Gently tuck the wire connections neatly into the ceiling junction box.
11. Attach the mounting plate (E) to the ceiling outlet box using the enclosed mounting screws (C). Tighten
screws with a screwdriver.
12. Pull canopy (E) up over the mounting plate (D), align the holes in the mounting plate with the holes in
the canopy.
13. Insert canopy screws (F) and tighten with a screwdriver.
14. Press down the metal nut (P) and adjust the Steel Wire (R) Length
15. Hang glass links onto the metal frame starting with the inner frame (L) . The inner frame takes up to 24
columns of glass links. The outer frame takes up to 28 columns of glass links. Each column should
take 4 pieces of glass.
4 columns
3 columns
Completing the assembly:
1. Insert 3 X Max 60 Watt (Type A) bulbs into the socket (O).
DO NOT EXCEED SPECIFIED WATTAGE.
2. Restore power to junction box and test xture.
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
WARNING:
·This lighting xture contains lead, a chemical know to the State of California to cause cancer, birth defects
and other reproductive harm. Wash hands after installing, handling, cleaning or otherwise touching this light
xture.
1577428
one column
of glass links
10 columns
9 columns
page 2 of 2
Loading...