framed bridge table
assembly instructions
! Tool required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as: cardboard or carpet to protect finish.
! Proper assembly of this item requires 2 people.
Hardware
A
short bolt 6mm x 10mm 16x
C
allen key 1x
B
long bolt 6mm x 15mm 6x
1361914-04.20.09
Page 1 of 3
framed bridge table
assembly instructions
Parts
Front & Back Assembly x2 End Rail x4 Wooden Top x1
1. Put one front & back assembly upside down on a soft surface. Attach end rails using short
bolt (A) and tighten completely using allen key (C). Complete setup by attaching alternate
front & back assembly to end rails using short bolt (A) and tightening with allen key (C).
A
1361914-.04.20.09
Page 2 of 3
framed bridge table
assembly instructions
2. Put wooden top upside down on a soft surface. Attach completed assembly to wooden
top using long bolts (B) and tighten completely using allen key (C). Once completed, rotate
the framed bridge table to its upright position.
B
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
1361914-.04.20.09
Page 3 of 3
Loading...