West Elm Floating Storage Console Assembly Instruction

floating storage console

assembly instructions

! Tool required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as: cardboard or carpet to protect finish.
! Proper assembly of this item requires 2 people.

Hardware

A

short bolt 4x

C

lock washer 8x

E

allen key 1x

!

CAUTION

• The top shelf of this cart/stand is intended for use with Plasma/LCD/DLP/HD televisions having a maximum
screen size of 42 inches and weight of 80 lbs; or Tube televisions having a maximum screen size of 24 inches
and weight of 80 lbs.

• All other support shelves should not be loaded more than 25 lbs.

• DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights
indicated may result in instability causing possible injury.

• This unit contains a permanent sticker located either beneath media support shelf or inside drawer.

• Do not allow children under 16 years to move cart.

B

long bolt 4x

D

flat washer 8x

9443367-03.26.09

Page 1 of 3

floating storage console

assembly instructions

1. Put the console upside down on a soft surface, such as: cardboard or carpet to protect nish.
Fasten metal legs to console with short bolt (A), long bolt (B), lock washer (C) and at washer (D)
as shown below. Tighten all bolts with supplied allen key (E).

A

2. With 2 adults turn the console to upright position.

CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.

9443367-03.26.09

Page 2 of 3