flip top storage with mirror
assembly instructions
! Tool required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as: cardboard or carpet to protect finish.
! Proper assembly of this item requires 2 people.
Hardware
BA
short bolt 4x
C
lock washer 10x
D
long bolt 6x
allen key 1x
8600595/8600587-03.26.09
Page 1 of 3
flip top storage with mirror
assembly instructions
Parts
1. Carefully lay the case back on a soft surface, such as: cardboard or carpet to protect nish.
Assemble leg on cabinet with 3 bolts (B), 2 bolts (A) with lock washers (C) as shown below.
2. Repeat step 1 for other leg.
3. With 2 adults turn the case to upright position.
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
8600595/8600587-03.26.09
Page 2 of 3
flip top storage with mirror
NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching unit to wall with anti-tip kits.
1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximatly 1” below the top on the back of the unit.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the unit top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten tower snug against wall.
8600595/8600587-03.26.09
Page 3 of 3
Loading...