West Elm Flat Stock brackets Assembly Instruction

NOTE:

: bracket at stock s/2

mounting instructions

• For your safety, installation by two people is recommended.

A

• STUD MOUNTING REQUIRED. LOAD CAPACITY IS 50 LBS.

• Wipe with a soft, dry cloth. To protect the nish, avoid
the use of all chemicals and household cleaners.

screw 8x

1. Use a stud nder to locate the studs in your wall and mark these locations in the desired mounting area of the wall.
Use a carpenter’s level to insure the shelf will be level. Hold the brackets at desired locations and mark through the holes
with a pencil onto the wall. Be sure that all screws will go into a stud.

2. Insert screws (A) through the bracket holes directly into studs.

3. Place wood shelf on brackets.

A

9180522/9180530/9180548/9180498/9180506/9180514 - 12/08

page 1 of 1