West Elm Faceted Frame Side Table Assembly Instruction

faceted frame side table

! Tools supplied:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.

Parts

assembly instructions

AB

Left panel 1x

Bottom Panel 1x

C

Table top 1x

D

Right panel 1x

Hardware

EF

Dowel 4x Bolt 12x

GH

Spring washer 12x

Flat washer 12x

Page 1 of 45609532 / 5640537 - 02.28.08

faceted frame side table

assembly instructions

1. Place the table top face down on a soft surface. Fully open the drawer (A). Insert 4 dowels (E) into the
holes in the table top sides as the drawing shows. Align the left panel (B) to the table top as shown.
Insert bolts (F) through spring washers (G), &  at washers (H). Locate the 3 holes on each side of the
inside of the table top and insert 1 bolt assembly into each hole through into the left panel (B).
Tighten with the supplied allen key. Repeat for the right panel (C). Close drawer.

H

G

F

Allen
key

E

C

B

A

Page 2 of 45609532 / 5640537 - 02.28.08