West Elm Deep Framed Wall Mirror Assembly Instruction

deep framed wall mirror

mounting instructions

NOTE

• Stud mounting is recommended. When in doubt, consult
your local hardware store. For your safety, installation by two
people is strongly recommended.

• Wipe frame with a soft, dry cloth. To protect the nish, avoid
the use of all chemicals and household cleaners.

A

drywall anchor 2x

B

screw 2x

! For drywall mounting, use anchors with screws.
! For stud mounting, use screws only.

. Place the template at the desired location on wall and
ensure that the template is level. Using a pencil, mark the
locations on the wall as shown. This is where the hardware
will be inserted.

2. For stud mounting: skip to step 3. For drywall mounting:
using a Philip’s head screwdriver, insert the drywall anchors
(A) into the wall at the insertion points. Press and turn clock­wise until anchors are ush with the wall.

3. Insert screws (B) into the anchors or at the insertion
points, leaving approximately /2” between the back of the
screw head and the wall.

4. Align keyhole notches over the screw heads.

5. Slide the mirror down until it rests on the screws. Tighten
or loosen screws as needed to t the shelf snugly against the
wall.

7806888/7806862/7806870—03/06

Page  of 